Table of Contents Author Guidelines Submit a Manuscript

Citations to this Journal [1,655 citations: 101–200 of 1,363 articles]

Articles published in Science and Technology of Nuclear Installations have been cited 1,655 times. The following is a list of the 1,363 articles that have cited the articles published in Science and Technology of Nuclear Installations.

  • Ahmad Ababneh, Muhammad Zubair, and Ahmed Ishag, “Station black out concurrent with PORV failure using a Generic Pressurized Water Reactor simulator,” Annals of Nuclear Energy, vol. 110, pp. 1081–1090, 2017. View at Publisher · View at Google Scholar
  • Samiran Sengupta, Aniruddha Ghosh, C. Sengupta, S. Mammen, P.K. Vijayan, and S. Bhattacharya, “Mixing of hot and cold fluid inside a square chimney model for a pool type research reactor – An experimental study,” Annals of Nuclear Energy, 2017. View at Publisher · View at Google Scholar
  • Nicola Pedroni, and Enrico Zio, “An Adaptive Metamodel-Based Subset Importance Sampling approach for the assessment of the functional failure probability of a thermal-hydraulic passive system,” Applied Mathematical Modelling, vol. 48, pp. 269–288, 2017. View at Publisher · View at Google Scholar
  • Seung-Kon Lee, Suseung Lee, Jun Sig Lee, Sang Wook Kim, and Taewoon Kim, “Development of silver nanoparticle–doped adsorbents for the separation and recovery of radioactive iodine from alkaline solutions,” Applied Radiation and Isotopes, vol. 129, pp. 215–221, 2017. View at Publisher · View at Google Scholar
  • Ned Xoubi, “Neutronic design study of accelerator driven system (ADS) for Jordan subcritical reactor as a neutron source for nuclear research,” Applied Radiation and Isotopes, 2017. View at Publisher · View at Google Scholar
  • V.V. Gaganov, “Calculation of neutron spectra produced in neutron generator target: code testing,” Applied Radiation and Isotopes, 2017. View at Publisher · View at Google Scholar
  • Cheng Ren, Xingtuan Yang, Haijun Jia, Yueyuan Jiang, and Wei Xiong, “Theoretical Analysis of Effective Thermal Conductivity for the Chinese HTR-PM Heat Transfer Test Facility,” Applied Sciences, vol. 7, no. 1, pp. 76, 2017. View at Publisher · View at Google Scholar
  • Ben Pauw, Graham Kennedy, Katrien Tichelen, Thomas Geernaert, Hugo Thienpont, and Francis Berghmans, “Characterizing Flow-Induced Vibrations of Fuel Assemblies for Future Liquid Metal Cooled Nuclear Reactors Using Quasi-Distributed Fibre-Optic Sensors,” Applied Sciences, vol. 7, no. 8, pp. 864, 2017. View at Publisher · View at Google Scholar
  • Sunil Kumar, P.K. Vijayan, Umasankari Kannan, Manish Sharma, and D.S. Pilkhwal, “Experimental and computational simulation of thermal stratification in large pools with immersed condenser,” Applied Thermal Engineering, vol. 113, pp. 345–361, 2017. View at Publisher · View at Google Scholar
  • Teodori, Malavasi, Marengo, Moreira, Valente, and Moita, “Effect of extreme wetting scenarios on pool boiling conditions,” Applied Thermal Engineering, vol. 115, pp. 1424–1437, 2017. View at Publisher · View at Google Scholar
  • Xin-Guo Yu, and Ki-Yong Choi, “Heat Transfer Scaling Analysis of the Single-Phase Natural Circulation Flow System,” Applied Thermal Engineering, 2017. View at Publisher · View at Google Scholar
  • Ritabrata Saha, Koushik Ghosh, Achintya Mukhopadhyay, and Swarnendu Sen, “Dynamic characterization of a single phase square natural circulation loop,” Applied Thermal Engineering, 2017. View at Publisher · View at Google Scholar
  • Wanli Chang, Xu Chu, Anes Fatima Binte Shaik Fareed, Sandeep Pandey, Jiayu Luo, Bernhard Weigand, and Eckart Laurien, “Heat Transfer Prediction of Supercritical Water with Artificial Neural Networks,” Applied Thermal Engineering, 2017. View at Publisher · View at Google Scholar
  • Muzaffer Kerem Ertek, and Gökhan Demir, “Evaluation of liquefaction potential and post-liquefaction settlements in a coastal region in Atakum,” Arabian Journal of Geosciences, vol. 10, no. 11, 2017. View at Publisher · View at Google Scholar
  • Ahmad Shaheryar, Xu-Cheng Yin, Hong-Wei Hao, Zahid Mahmood, and Adnan O. M. Abuassba, “Selection of optimal denoising-based regularization hyper-parameters for performance improvement in a sensor validation model,” Artificial Intelligence Review, 2017. View at Publisher · View at Google Scholar
  • Mohd Fadzil Faisae Ab Rashid, “A hybrid Ant-Wolf algorithm to optimize assembly sequence planning problem,” Assembly Automation, vol. 37, no. 2, pp. 238–248, 2017. View at Publisher · View at Google Scholar
  • Tarasov, Kiselev, Filippov, Yudina, Grigoruk, Koshmanov, Keller, and Khristenko, “Development and Verification of a Model of RVK-500, -1000 Recombiners for Modeling the Containment Shells of NPP with VVER by Computational Hydrodynamics,” Atomic Energy, vol. 121, no. 3, pp. 166–172, 2017. View at Publisher · View at Google Scholar
  • Sang-Chae Jeon, Jae-Won Lee, Joo-Young Yoon, Yung-Zun Cho, and Jin-Mok Hur, “Passivation of Al 2 O 3 -based refractories by air-plasma-sprayed coatings of Y 2 O 3 to suppress reaction with gaseous Cs,” Ceramics International, 2017. View at Publisher · View at Google Scholar
  • Sachin U. Nandanwar, Kai Coldsnow, Austin Porter, Piyush Sabharwall, D. Eric Aston, David N. McIlroy, and Vivek Utgikar, “Adsorption of radioactive iodine and krypton from off-gas stream using continuous flow adsorption column,” Chemical Engineering Journal, vol. 320, pp. 222–231, 2017. View at Publisher · View at Google Scholar
  • Zoheb Khan, Vishal H. Bhusare, and Jyeshtharaj B. Joshi, “Comparison of turbulence models for bubble column reactors,” Chemical Engineering Science, 2017. View at Publisher · View at Google Scholar
  • Klas Jareteg, Henrik Ström, Srdjan Sasic, and Christophe Demazière, “On the dynamics of instabilities in two-fluid models for bubbly flows,” Chemical Engineering Science, 2017. View at Publisher · View at Google Scholar
  • Vikas Pandey, and Suneet Singh, “Characterization of stability limits of Ledinegg instability and density wave oscillations for two-phase flow in natural circulation loops,” Chemical Engineering Science, 2017. View at Publisher · View at Google Scholar
  • Minman Tong, Youshi Lan, Qingyuan Yang, and Chongli Zhong, “Exploring the Structure-Property Relationships of Covalent Organic Frameworks for Noble Gas Separations,” Chemical Engineering Science, 2017. View at Publisher · View at Google Scholar
  • Jianyang Zhou, Xiaoping Luo, Cong Deng, Mingyu Xie, Lin Zhang, Di Wu, and Feng Guo, “Influence of nanoparticle concentrations on flow boiling heat transfer coefficients of Al 2 O 3 /R141b in micro heat exchanger by direct metal laser sintering,” Chinese Journal of Chemical Engineering, 2017. View at Publisher · View at Google Scholar
  • Ahmed. M. El-Khatib, Bohaysa. A. Salem, Mohamed. S. Badawi, Mona. M. Gouda, Abouzeid. A. Thabet, and Mahmoud. I. Abbas, “Full-Energy Peak Efficiency of an NaI(Tl) Detector with Coincidence Summing Correction Showing the Effect of the Source-to-Detector Distance,” Chinese Journal of Physics, 2017. View at Publisher · View at Google Scholar
  • Lee Brian Gardner, Don K Ryland, and Sam Suppiah, “Development Of A Hydrogen Management Concept For The Canadian Supercritical Water-Cooled Reactor,” CNL Nuclear Review, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Yi Chen, Ying Shao, Jie Yan, Shuihua Wang, Ti-Fei Yuan, Yanwen Qu, and Elizabeth Le, “A feature-free 30-disease pathological brain detection system by linear regression classifier,” CNS and Neurological Disorders - Drug Targets, vol. 16, no. 1, pp. 5–10, 2017. View at Publisher · View at Google Scholar
  • Z. Sas, R. Doherty, T. Kovacs, M. Soutsos, W. Sha, and W. Schroeyers, “Radiological evaluation of by-products used in construction and alternative applications; Part I. Preparation of a natural radioactivity database,” Construction and Building Materials, vol. 150, pp. 227–237, 2017. View at Publisher · View at Google Scholar
  • Alessandra Boschi, Petra Martini, Micol Pasquali, and Licia Uccelli, “Recent achievements in Tc-99m radiopharmaceutical direct production by medical cyclotrons,” Drug Development and Industrial Pharmacy, pp. 1–11, 2017. View at Publisher · View at Google Scholar
  • Han Lim Cha, and Jong-Il Yun, “Redox behaviors of zirconium in molten LiCl-KCl eutectic salt based on the comproportionation reaction between Zr(0) and Zr(IV),” Electrochemistry Communications, vol. 84, pp. 86–89, 2017. View at Publisher · View at Google Scholar
  • Dalsung Yoon, and Supathorn Phongikaroon, “Measurement and Analysis of Exchange Current Density for U/U3+ Reaction in LiCl-KCl Eutectic Salt via Various Electrochemical Techniques,” Electrochimica Acta, 2017. View at Publisher · View at Google Scholar
  • Jia Song, Xuejiao Li, Shuping Shi, Liuming Yan, Tao Jiang, and Shuming Peng, “Towards the calculations of redox potentials in molten LiCl-KCl eutectic by ensemble averages based on first principles molecular dynamics,” Electrochimica Acta, 2017. View at Publisher · View at Google Scholar
  • Jarrod Gesualdi, Chen Ta Yu, Timothy Lichtenstein, Thomas P. Nigl, and Hojong Kim, “Thermodynamic Properties of Barium-Antimony Alloys Determined by Emf Measurements,” Electrochimica Acta, vol. 251, pp. 203–211, 2017. View at Publisher · View at Google Scholar
  • Yixiang Liao, and Dirk Lucas, “Possibilities and Limitations of CFD Simulation for Flashing Flow Scenarios in Nuclear Applications,” Energies, vol. 10, no. 1, pp. 139, 2017. View at Publisher · View at Google Scholar
  • Wei Zhang, Jinghui Peng, and Songjing Li, “Damping Force Modeling and Suppression of Self-Excited Vibration due to Magnetic Fluids Applied in the Torque Motor of a Hydraulic Servovalve,” Energies, vol. 10, no. 6, pp. 749, 2017. View at Publisher · View at Google Scholar
  • Jérôme Serp, Christophe Poinssot, and Stéphane Bourg, “Assessment of the Anticipated Environmental Footprint of Future Nuclear Energy Systems. Evidence of the Beneficial Effect of Extensive Recycling,” Energies, vol. 10, no. 9, pp. 1445, 2017. View at Publisher · View at Google Scholar
  • Costante Invernizzi, “Prospects of Mixtures as Working Fluids in Real-Gas Brayton Cycles,” Energies, vol. 10, no. 10, pp. 1649, 2017. View at Publisher · View at Google Scholar
  • Ruxing Gao, Hyo Nam, Won Ko, and Hong Jang, “National Options for a Sustainable Nuclear Energy System: MCDM Evaluation Using an Improved Integrated Weighting Approach,” Energies, vol. 10, no. 12, pp. 2017, 2017. View at Publisher · View at Google Scholar
  • Walter Borreani, Alessandro Alemberti, Guglielmo Lomonaco, Fabrizio Magugliani, and Paolo Saracco, “Design and Selection of Innovative Primary Circulation Pumps for GEN-IV Lead Fast Reactors,” Energies, vol. 10, no. 12, pp. 2079, 2017. View at Publisher · View at Google Scholar
  • Yuegeng Ma, Ming Liu, Junjie Yan, and Jiping Liu, “Thermodynamic study of main compression intercooling effects on supercritical CO2 recompression Brayton cycle,” Energy, vol. 140, pp. 746–756, 2017. View at Publisher · View at Google Scholar
  • S. Quezada-García, G. Espinosa-Paredes, M.A. Escobedo-Izquierdo, A. Vázquez-Rodríguez, R. Vázquez-Rodríguez, and J.J. Ambriz-García, “Heterogeneous Model for Heat Transfer in Green Roof Systems,” Energy and Buildings, 2017. View at Publisher · View at Google Scholar
  • Maris Zamovskis, Ruta Vanaga, and Andra Blumberga, “Mathematical Modelling of Performance of New Type of Climate Adaptive Building Shell,” Energy Procedia, vol. 113, pp. 270–276, 2017. View at Publisher · View at Google Scholar
  • Yi-Ning Zhang, Hao-Chun Zhang, Hai-Yan Yu, and Chao Ma, “Response Surface Methodology Control Rod Position Optimization of a Pressurized Water Reactor Core Considering Both High Safety and Low Energy Dissipation,” Entropy, vol. 19, no. 2, pp. 63, 2017. View at Publisher · View at Google Scholar
  • José-Luis Muñoz-Cobo, Rafael Mendizábal, Arturo Miquel, Cesar Berna, and Alberto Escrivá, “Use of the Principles of Maximum Entropy and Maximum Relative Entropy for the Determination of Uncertain Parameter Distributions in Engineering Applications,” Entropy, vol. 19, no. 9, pp. 486, 2017. View at Publisher · View at Google Scholar
  • Federico Rocchi, Antonio Guglielmelli, Donato Maurizio Castelluccio, and Cristian Massimi, “Reassessment of gadolinium odd isotopes neutron cross sections: scientific motivations and sensitivity-uncertainty analysis on LWR fuel assembly criticality calculations,” EPJ Nuclear Sciences & Technologies, vol. 3, pp. 21, 2017. View at Publisher · View at Google Scholar
  • Olivier Leray, Dimitri Rochman, Michael Fleming, Jean-Christophe Sublet, Arjan Koning, Alexander Vasiliev, and Hakim Ferroukhi, “Fission yield covariances for JEFF: A Bayesian Monte Carlo method,” EPJ Web of Conferences, vol. 146, pp. 09023, 2017. View at Publisher · View at Google Scholar
  • Mathieu Hursin, Olivier Leray, Gregory Perret, Andreas Pautz, Friederike Bostelmann, Alexander Aures, and Winfried Zwermann, “Impact of implicit effects on uncertainties and sensitivities of the Doppler coefficient of a LWR pin cell,” EPJ Web of Conferences, vol. 146, pp. 09034, 2017. View at Publisher · View at Google Scholar
  • J. Herault, F. Duval, and M. Le Bars, “Mass transport induced by a jet impinging on a density interface: The role of interfacial wave breaking,” EPL (Europhysics Letters), vol. 117, no. 6, pp. 64003, 2017. View at Publisher · View at Google Scholar
  • Parul Goel, Arun K. Nayak, Pradyumna Ghosh, and Jyeshtharaj B. Joshi, “Experimental study of bubble departure characteristics in forced convective subcooled nucleate boiling,” Experimental Heat Transfer, pp. 1–25, 2017. View at Publisher · View at Google Scholar
  • Jianyang Zhou, Xiaoping Luo, Zhenfei Feng, Jian Xiao, Jinxin Zhang, Feng Guo, and Haiyan Li, “Saturated flow boiling heat transfer investigation for nanofluid in minichannel,” Experimental Thermal and Fluid Science, 2017. View at Publisher · View at Google Scholar
  • In Guk Kim, and In Cheol Bang, “Hydraulic Control Rod Drive Mechanism Concept for Passive In-core Cooling System (PINCs) in Fully Passive Advanced Nuclear Power Plant,” Experimental Thermal and Fluid Science, 2017. View at Publisher · View at Google Scholar
  • Nirupama Patra, Vivek Gupta, Eswar Pradyumna, Ravi Singh, Pradyumna Ghosh, R.S. Singh, and Arun Nayak, “Delay in DNB for flow boiling of diluted oxide based nanofluids,” Experimental Thermal and Fluid Science, 2017. View at Publisher · View at Google Scholar
  • Arif Widyatama, Okto Dinaryanto, Indarto, and Deendarlianto, “The Development Of Image Processing Technique To Study The Interfacial Behavior Of Air-Water Slug Two-Phase Flow In Horizontal Pipes,” Flow Measurement and Instrumentation, 2017. View at Publisher · View at Google Scholar
  • P. Batistoni, S. Popovichev, R. Crowe, A. Cufar, Z. Ghani, K. Keogh, A. Peacock, R. Price, A. Baranov, S. Korotkov, P. Lykin, and A. Samoshin, “Technical preparations for the in-vessel 14 MeV neutron calibration at JET,” Fusion Engineering and Design, vol. 117, pp. 107–114, 2017. View at Publisher · View at Google Scholar
  • Kun Xu, Minyou Ye, Yuntao Song, Bingbing Xu, Shenji Wang, Mingzhun Lei, Xufeng Liu, and Shifeng Mao, “Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR integration design platform,” Fusion Engineering and Design, 2017. View at Publisher · View at Google Scholar
  • M. Nematollahi, and M. Rezaiean, “Experimental Evaluation of Natural Circulation Pressure Drop in a Boiling Channel,” Fusion Science and Technology, vol. 61, no. 1T, pp. 174–177, 2017. View at Publisher · View at Google Scholar
  • S. V. Stefanovsky, S. V. Yudintsev, S. E. Vinokurov, and B. F. Myasoedov, “Chemical-technological and mineralogical-geochemical aspects of the radioactive waste management,” Geochemistry International, vol. 54, no. 13, pp. 1136–1155, 2017. View at Publisher · View at Google Scholar
  • Dalin Zhang, Jianping Jing, Bin Jia, Lei Lei, Jinsheng Bi, Jiaxu Zuo, Yaning Liu, and Chunming Zhang, “Characteristic of core flow and heat transfer of different fuel ball arrangement modes in molten salt reactor,” He Jishu/Nuclear Techniques, vol. 40, no. 2, 2017. View at Publisher · View at Google Scholar
  • Shijo Thomas, and Choondal B. Sobhan, “Stability and transient performance of vertical heater vertical cooler natural circulation loops with metal oxide nanoparticle suspensions,” Heat Transfer Engineering, pp. 0–0, 2017. View at Publisher · View at Google Scholar
  • Jingran Fei, Shengyi Si, and Qichang Chen, “Multi-physics analysis of metallic fuel deformation by numerical fuel rod code YUAN,” Hedongli Gongcheng/Nuclear Power Engineering, vol. 38, no. 1, pp. 67–71, 2017. View at Publisher · View at Google Scholar
  • Juan Chen, Tao Zhou, Shi Qi, Dongliang Ma, and Zejun Xiao, “Experimental Study of Natural Circulation Flow Instability in Rectangle Channels,” Hedongli Gongcheng/Nuclear Power Engineering, vol. 38, no. 2, pp. 51–55, 2017. View at Publisher · View at Google Scholar
  • Bin Han, Baowen Yang, Hui Zhang, Yudong Zha, and Cheng Peng, “Analysis of Empirical Pressure Drop Correlations and CFD Numerical Study on Spacer Grid,” Hedongli Gongcheng/Nuclear Power Engineering, vol. 38, no. 2, pp. 169–174, 2017. View at Publisher · View at Google Scholar
  • Xiaochuan Jiang, Kai He, Nirong Yang, and Zifan Song, “Uncertainty Analysis of Manufacturer Parameters Impact on TVS-2M Fuel Rod Performance in Reactor,” Hedongli Gongcheng/Nuclear Power Engineering, vol. 38, no. 4, pp. 134–138, 2017. View at Publisher · View at Google Scholar
  • Yan Yu, Jiandong Wang, and Zijiang Yang, “Design of Alarm Trippoints for Univariate Process Variables Based on Alarm Probability Plots,” IEEE Transactions on Industrial Electronics, pp. 1–1, 2017. View at Publisher · View at Google Scholar
  • Sunil P U, Khushali Desai, Jayesh Barve, and P.S.V. Nataraj, “Lab Scale Boiler Setup for Process Control Research and Education,” IFAC-PapersOnLine, vol. 50, no. 1, pp. 2373–2378, 2017. View at Publisher · View at Google Scholar
  • Carter W. Abney, Yue Nan, and Lawrence L. Tavlarides, “X-ray Absorption Spectroscopy Investigation of Iodine Capture by Silver-Exchanged Mordenite,” Industrial & Engineering Chemistry Research, 2017. View at Publisher · View at Google Scholar
  • Yue Nan, Ronghong Lin, Jiuxu Liu, Tyler B. Crowl, Austin Ladshaw, Sotira Yiacoumi, Costas Tsouris, and Lawrence L. Tavlarides, “Adsorption Equilibrium and Modeling of Water Vapor on Reduced and Unreduced Silver-Exchanged Mordenite,” Industrial & Engineering Chemistry Research, 2017. View at Publisher · View at Google Scholar
  • Amanda J. Youker, M. Alex Brown, Thad A. Heltemes, and George F. Vandegrift, “Controlling Pu behavior on Titania: Implications for LEU Fission-Based Mo-99 Production,” Industrial & Engineering Chemistry Research, 2017. View at Publisher · View at Google Scholar
  • Dorina F. Sava Gallis, Ivan Ermanoski, Karena W. Chapman, Tina M. Nenoff, and Jeffrey A. Greathouse, “Iodine Gas Adsorption in Nanoporous Materials: A Combined Experiment-Modeling Study,” Industrial and Engineering Chemistry Research, vol. 56, no. 8, pp. 2331–2338, 2017. View at Publisher · View at Google Scholar
  • Mohd Fahmi Mohd Yusof, Rokiah Hashim, Sabar Bauk, Abd Aziz Tajuddin, and Othman Sulaiman, “Characterization of tannin-added Rhizophora spp. particleboards as phantom materials for photon beams,” Industrial Crops and Products, vol. 95, pp. 467–474, 2017. View at Publisher · View at Google Scholar
  • S. Ruengsri, J. Kaewkhao, P. Limkitjaroenporm, P. Meejitpaisan, W. Hongtong, and W. Cheewasukhanont, “Development of gadolinium calcium phosphate oxyfluoride glass for radiation shielding materials,” Integrated Ferroelectrics, vol. 177, no. 1, pp. 48–58, 2017. View at Publisher · View at Google Scholar
  • Alireza Mohammadi Ghahdarijani, Faramarz Hormozi, and Ali Haghighi Asl, “Convective heat transfer and pressure drop study on nanofluids in double-walled reactor by developing an optimal multilayer perceptron artificial neural network,” International Communications in Heat and Mass Transfer, vol. 84, pp. 11–19, 2017. View at Publisher · View at Google Scholar
  • et al. Alssabbagh, “Evaluation of nine 3D printing materials as tissue equivalent materials in terms of mass attenuation coefficient and mass density,” International Journal of ADVANCED AND APPLIED SCIENCES, vol. 4, no. 9, pp. 168–173, 2017. View at Publisher · View at Google Scholar
  • Chenglong Wang, Kaichao Sun, Dalin Zhang, Wenxi Tian, Suizheng Qiu, and Guanghui Su, “Thermal-hydraulic design and analysis of a small modular molten salt reactor (MSR) with solid fuel,” International Journal of Energy Research, 2017. View at Publisher · View at Google Scholar
  • A. Ananthanarayanan, S. A. Khot, V. Jaiswal, A. Joseph, P. P. Songire, D. Banerjee, and J. G. Shah, “ Effect of NO x on AgI formation in Ag-mordenite ,” International Journal of Environmental Studies, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • Seol Ha Kim, Gi Cheol Lee, Jun Young Kang, Kiyofumi Moriyama, Hyun Sun Park, and Moo Hwan Kim, “The role of surface energy in heterogeneous bubble growth on ideal surface,” International Journal of Heat and Mass Transfer, vol. 108, pp. 1901–1909, 2017. View at Publisher · View at Google Scholar
  • Iman Zeynali Famileh, and Javad Abolfazli Esfahani, “Experimental investigation of wet flue gas condensation using twisted tape insert,” International Journal of Heat and Mass Transfer, vol. 108, pp. 1466–1480, 2017. View at Publisher · View at Google Scholar
  • Shenhui Zhai, Chao Bai, Jianqing Liu, and Tao Luan, “Enhancement of laminar film condensation with diversion panels for large space,” International Journal of Heat and Mass Transfer, vol. 108, pp. 1819–1824, 2017. View at Publisher · View at Google Scholar
  • M. Mohib Ur Rehman, Z.G. Qu, R.P. Fu, and H.T. Xu, “Numerical study on free-surface jet impingement cooling with nanoencapsulated phase-change material slurry and nanofluid,” International Journal of Heat and Mass Transfer, vol. 109, pp. 312–325, 2017. View at Publisher · View at Google Scholar
  • Meng Lv, Yuan Zhou, Jingtan Chen, Mingjun Zhong, and Junfeng Wang, “Numerical simulation of metal jet breakup, cooling and solidification in water,” International Journal of Heat and Mass Transfer, vol. 109, pp. 1100–1109, 2017. View at Publisher · View at Google Scholar
  • Hui Cheng, Jiyun Zhao, and Marcin Karol Rowinski, “Study on two wall temperature peaks of supercritical fluid mixed convective heat transfer in circular tubes,” International Journal of Heat and Mass Transfer, vol. 113, pp. 257–267, 2017. View at Publisher · View at Google Scholar
  • Meysam Nazari, Davood Jalali Vahid, Rahim Khoshbakhti Saray, and Yasser Mahmoudi, “Experimental investigation of heat transfer and second law analysis in a pebble bed channel with internal heat generation,” International Journal of Heat and Mass Transfer, vol. 114, pp. 688–702, 2017. View at Publisher · View at Google Scholar
  • Schüller, and Kowalski, “Spatially varying heat flux driven close-contact melting – A Lagrangian approach,” International Journal of Heat and Mass Transfer, vol. 115, pp. 1276–1287, 2017. View at Publisher · View at Google Scholar
  • M. Abdollahzadeh, M. Esmaeilpour, R. Vizinho, A. Younesi, and J.C. Pàscoa, “Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer,” International Journal of Heat and Mass Transfer, vol. 115, pp. 1288–1308, 2017. View at Publisher · View at Google Scholar
  • Matteo Nobili, and Gianfranco Caruso, “Preliminary evaluation of the expansion system size for a pressurized gas loop: Application to a fusion reactor based on a helium-cooled blanket,” International Journal of Heat and Technology, vol. 35, no. 1, pp. 211–218, 2017. View at Publisher · View at Google Scholar
  • Mahdi Saghafi, Faramarz Yousefpour, Kaveh Karimi, and Seyed Mohsen Hoseyni, “Determination of PAR configuration for PWR containment design: A hydrogen mitigation strategy,” International Journal of Hydrogen Energy, 2017. View at Publisher · View at Google Scholar
  • Minoru Takahashi, Marco Pellegrini, Giuseppe Gregu, and Riccardo Mereu, “Experimental study on steam chugging phenomenon in a vertical sparger,” International Journal of Multiphase Flow, vol. 88, pp. 87–98, 2017. View at Publisher · View at Google Scholar
  • K. Harby, S. Chiva, and J.L Muñoz-Cobo, “Modelling and experimental investigation of horizontal buoyant gas jets injected into stagnant uniform ambient liquid,” International Journal of Multiphase Flow, 2017. View at Publisher · View at Google Scholar
  • Jigar Parekh, and Roland Rzehak, “Euler-Euler Multiphase CFD-Simulation with Full Reynolds Stress Model and Anisotropic Bubble-induced Turbulence,” International Journal of Multiphase Flow, 2017. View at Publisher · View at Google Scholar
  • Daniel E. Milian Lorenzo, Lorena P. Rodríguez Garcia, Manuel Cadavid Rodríguez, Daniel Milian Pérez, Carlos A. Brayner De Oliveira Lira, and Carlos R. García Hernández, “Effects of some calculation parameters on the computational modelling of temperature, velocity and gas volume fraction during steady-state operation of an aqueous homogeneous reactor,” International Journal of Nuclear Energy Science and Technology, vol. 11, no. 1, pp. 1–21, 2017. View at Publisher · View at Google Scholar
  • Sumit Kumar Saha, and Nityananda Nandi, “Numerical study about the change in flow separation and velocity distribution in a 90° pipe bend with/without guide vane conditions,” International Journal of Technology, vol. 8, no. 4, pp. 681–689, 2017. View at Publisher · View at Google Scholar
  • Efrizon Umar, Anhar Riza Antariksawan, Surip Widodo, Mulya Juarsa, and Mukhsinun Hadi Kusuma, “TRIGA-2000 research reactor thermal-hydraulic analysis using RELAP/SCDAPSIM/MOD3.4,” International Journal of Technology, vol. 8, no. 4, pp. 698–708, 2017. View at Publisher · View at Google Scholar
  • Iman Zeynali Famileh, Javad Abolfazli Esfahani, and Kambiz Vafai, “Effect of nanoparticles on condensation of humid air in vertical channels,” International Journal of Thermal Sciences, vol. 112, pp. 470–483, 2017. View at Publisher · View at Google Scholar
  • Tetsuya Ariyoshi, Shota Funaki, Kenji Sakamoto, Akiyoshi Baba, and Yutaka Arima, “X-ray-to-current signal conversion characteristics of trench-structured photodiodes for direct-conversion-type silicon X-ray sensor,” Japanese Journal of Applied Physics, vol. 56, no. 4S, pp. 04CH06, 2017. View at Publisher · View at Google Scholar
  • J. Gan, N. Jerred, E. Perez, and D. C. Haggard, “Laser and Pressure Resistance Weld of Thin-Wall Cladding for LWR Accident-Tolerant Fuels,” Jom, 2017. View at Publisher · View at Google Scholar
  • Firas Benhassen, Mark F. Reeder, and Marc D. Polanka, “Trajectory Measurements of a Horizontally Oriented Buoyant Jet in a Coflow Using Filtered Rayleigh Scattering,” Journal of Aerospace Engineering, vol. 30, no. 1, 2017. View at Publisher · View at Google Scholar
  • J. R. Einhorn, M. A. Steiner, S. C. Vogel, E. Garlea, and S. R. Agnew, “ Crystallographic texture of straight-rolled α-uranium foils via neutron and X-ray diffraction ,” Journal of Applied Crystallography, vol. 50, no. 3, pp. 859–865, 2017. View at Publisher · View at Google Scholar
  • M. A. Marzouk, S. M. Abo-Naf, H. A. Zayed, and N. S. Hassan, “Glass Former Effects on Photoluminescence and Optical Properties of Some Heavy Metal Oxide Glasses Doped with Transition Metal Ions,” Journal of Applied Spectroscopy, 2017. View at Publisher · View at Google Scholar
  • Klas Jareteg, Srdjan Sasic, Paolo Vinai, and Christophe Demazière, “A numerical framework for bubble transport in a subcooled fluid flow,” Journal of Computational Physics, 2017. View at Publisher · View at Google Scholar
  • Kai Kordelin, Jaana Kordelin, Markku Johansson, Johanna Virkki, Leena Ukkonen, and Lauri Sydänheimo, “Experimental Study on RFID Antenna Reading Areas in a Tunnel System,” Journal of Engineering, vol. 2017, pp. 1–15, 2017. View at Publisher · View at Google Scholar