About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [4,670 citations: 1–100 of 3,892 articles]

Articles published in Shock and Vibration have been cited 4,670 times. The following is a list of the 3,892 articles that have cited the articles published in Shock and Vibration.

  • Jaka Javh, Janko Slavič, and Miha Boltežar, “High frequency modal identification on noisy high-speed camera data,” Mechanical Systems and Signal Processing, vol. 98, pp. 344–351, 2018. View at Publisher · View at Google Scholar
  • Piotr Sitarz, and Bartosz Powałka, “Dual ant colony operational modal analysis parameter estimation method,” Mechanical Systems and Signal Processing, vol. 98, pp. 231–267, 2018. View at Publisher · View at Google Scholar
  • Zhijun Li, Maria Q. Feng, Longxi Luo, Dongming Feng, and Xiuli Xu, “Statistical analysis of modal parameters of a suspension bridge based on Bayesian spectral density approach and SHM data,” Mechanical Systems and Signal Processing, vol. 98, pp. 352–367, 2018. View at Publisher · View at Google Scholar
  • A. R. Khaloo, H. Karimi, S. Asadollahi, and M. Dehestani, “A New Mixture Design Method for Ultra-High-Strength Concrete,” ACI Materials Journal, vol. 114, no. 2, 2017. View at Publisher · View at Google Scholar
  • Miao Tang, Gang Huang, Huanhuan Zhang, Yuling Liu, Haijian Chang, Hongzan Song, Donghua Xu, and Zhigang Wang, “Dependences of Rheological and Compression Mechanical Properties on Cellular Structures for Impact-Protective Materials,” ACS Omega, vol. 2, no. 5, pp. 2214–2223, 2017. View at Publisher · View at Google Scholar
  • Fabian Schnelle, and Peter Eberhard, “Adaptive nonlinear model predictive control design of a flexible-link manipulator with uncertain parameters,” Acta Mechanica Sinica, 2017. View at Publisher · View at Google Scholar
  • Chen Lu, Zhenya Wang, and Bo Zhou, “Intelligent fault diagnosis of rolling bearing using hierarchical convolutional network based health state classification,” Advanced Engineering Informatics, vol. 32, pp. 139–151, 2017. View at Publisher · View at Google Scholar
  • Jinxing Lai, Junling Qiu, Haobo Fan, Jianxun Chen, Zhinan Hu, Qian Zhang, and Junbao Wang, “Structural Safety Assessment of Existing Multiarch Tunnel: A Case Study,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–11, 2017. View at Publisher · View at Google Scholar
  • Mosbeh R. Kaloop, and Jong Wan Hu, “Seismic Response Prediction of Buildings with Base Isolation Using Advanced Soft Computing Approaches,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–12, 2017. View at Publisher · View at Google Scholar
  • Yuanming Shu, Yun Shi, Peiliang Xu, Xiaoji Niu, and Jingnan Liu, “Error analysis of high-rate GNSS precise point positioning for seismic wave measurement,” Advances in Space Research, 2017. View at Publisher · View at Google Scholar
  • Yu Hong, Qianhui Pu, Yang Wang, Liangjun Chen, Hongye Gou, and Xiaobin Li, “Model-updating with experimental frequency response function considering general damping,” Advances in Structural Engineering, pp. 136943321770678, 2017. View at Publisher · View at Google Scholar
  • Wei Sun, Mingwei Zhu, and Zhuo Wang, “Free vibration analysis of a hard-coating cantilever cylindrical shell with elastic constraints,” Aerospace Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Everaldo de Barros, Fernando Juliani, and Leandro Ribeiro de Camargo, “Experimental facilities for modal testing,” Aircraft Engineering and Aerospace Technology, vol. 89, no. 2, pp. 358–363, 2017. View at Publisher · View at Google Scholar
  • A. Diez-Ibarbia, M. Battarra, J. Palenzuela, G. Cervantes, S. Walsh, M. De-la-Cruz, S. Theodossiades, and L. Gagliardini, “Comparison between transfer path analysis methods on an electric vehicle,” Applied Acoustics, vol. 118, pp. 83–101, 2017. View at Publisher · View at Google Scholar
  • Faeez A. Masurkar, and Nitesh P. Yelve, “Optimizing location of damage within an enclosed area defined by an algorithm based on the Lamb wave response data,” Applied Acoustics, vol. 120, pp. 98–110, 2017. View at Publisher · View at Google Scholar
  • Ruiliang Zhang, Xi Gu, Fengshou Gu, Tie Wang, and Andrew Ball, “Gear Wear Process Monitoring Using a Sideband Estimator Based on Modulation Signal Bispectrum,” Applied Sciences, vol. 7, no. 3, pp. 274, 2017. View at Publisher · View at Google Scholar
  • Weimin Cheng, Guoming Liu, and Lianjun Chen, “Pet Fiber Reinforced Wet-Mix Shotcrete with Walnut Shell as Replaced Aggregate,” Applied Sciences, vol. 7, no. 4, pp. 345, 2017. View at Publisher · View at Google Scholar
  • Huanguo Chen, Jianyang Shen, Wenhua Chen, Chuanyu Wu, Chunshao Huang, Yongyu Yi, and Jiacheng Qian, “The Bivariate Empirical Mode Decomposition and Its Contribution to Grinding Chatter Detection,” Applied Sciences, vol. 7, no. 2, pp. 145, 2017. View at Publisher · View at Google Scholar
  • Cancan Yi, Yong Lv, Han Xiao, Guanghui You, and Zhang Dang, “Research on the Blind Source Separation Method Based on Regenerated Phase-Shifted Sinusoid-Assisted EMD and Its Application in Diagnosing Rolling-Bearing Faults,” Applied Sciences, vol. 7, no. 4, pp. 414, 2017. View at Publisher · View at Google Scholar
  • Xuezhen Wu, Yujing Jiang, Jianhua Wang, Kusaba Masaya, Tetsuya Taniguchi, and Takahide Yamato, “A New Health Assessment Index of Tunnel Lining Based on the Digital Inspection of Surface Cracks,” Applied Sciences, vol. 7, no. 5, pp. 507, 2017. View at Publisher · View at Google Scholar
  • Kongming Guo, and Yalan Xu, “Random Vibration Suppression of a Truss Core Sandwich Panel Using Independent Modal Resonant Shunt and Modal Criterion,” Applied Sciences, vol. 7, no. 5, pp. 496, 2017. View at Publisher · View at Google Scholar
  • Huanguo Chen, Pei Chen, Wenhua Chen, Chuanyu Wu, Jianmin Li, and Jianwei Wu, “Wind Turbine Gearbox Fault Diagnosis Based on Improved EEMD and Hilbert Square Demodulation,” Applied Sciences, vol. 7, no. 2, pp. 128, 2017. View at Publisher · View at Google Scholar
  • Andrius Čeponis, Dalius Mažeika, and Vytautas Bakanauskas, “Trapezoidal Cantilevers with Irregular Cross-Sections for Energy Harvesting Systems,” Applied Sciences, vol. 7, no. 2, pp. 134, 2017. View at Publisher · View at Google Scholar
  • Bo Yan, Ke Wang, Zifan Hu, Chuanyu Wu, and Xinong Zhang, “Shunt Damping Vibration Control Technology: A Review,” Applied Sciences, vol. 7, no. 5, pp. 494, 2017. View at Publisher · View at Google Scholar
  • John J. Moughty, and Joan R. Casas, “A State of the Art Review of Modal-Based Damage Detection in Bridges: Development, Challenges, and Solutions,” Applied Sciences, vol. 7, no. 5, pp. 510, 2017. View at Publisher · View at Google Scholar
  • Mario A. de Oliveira, and Daniel J. Inman, “Performance analysis of simplified Fuzzy ARTMAP and Probabilistic Neural Networks for identifying structural damage growth,” Applied Soft Computing, vol. 52, pp. 53–63, 2017. View at Publisher · View at Google Scholar
  • Md Sazzad Hossain, Zhi Chao Ong, Zubaidah Ismail, Siamak Noroozi, and Shin Yee Khoo, “Artificial neural networks for vibration based inverse parametric identifications: A review,” Applied Soft Computing, vol. 52, pp. 203–219, 2017. View at Publisher · View at Google Scholar
  • Zhigang Liu, Anye Cao, Guangan Zhu, and Changbin Wang, “Numerical Simulation and Engineering Practice for Optimal Parameters of Deep-Hole Blasting in Sidewalls of Roadway,” Arabian Journal for Science and Engineering, 2017. View at Publisher · View at Google Scholar
  • Yunke Zhao, Dongyan Shi, and Huan Meng, “A unified spectro-geometric-Ritz solution for free vibration analysis of conical–cylindrical–spherical shell combination with arbitrary boundary conditions,” Archive of Applied Mechanics, 2017. View at Publisher · View at Google Scholar
  • Yury Selyutskiy, Rinaldo Garziera, and Luca Collini, “On dynamics of a rigid body on a moving rough plane,” Archive of Applied Mechanics, 2017. View at Publisher · View at Google Scholar
  • Ravi Ranade, Victor C. Li, William F. Heard, and Brett A. Williams, “Impact resistance of high strength-high ductility concrete,” Cement and Concrete Research, vol. 98, pp. 24–35, 2017. View at Publisher · View at Google Scholar
  • Shuang Liu, Hongling Ai, Baoping Sun, Shuo Li, and Zong Meng, “Bifurcation and chaos of electromechanical coupling main drive system with strongly nonlinear characteristic in mill,” Chaos, Solitons & Fractals, vol. 98, pp. 101–108, 2017. View at Publisher · View at Google Scholar
  • Xie Changchuan, An Chao, Liu Yi, and Yang Chao, “Static aeroelastic analysis including geometric nonlinearities based on reduced order model,” Chinese Journal of Aeronautics, 2017. View at Publisher · View at Google Scholar
  • Jacob Abiodun Gbadeyan, and Fatai Akangbe Hammed, “Influence of a Moving Mass on the Dynamic Behaviour of Viscoelastically Connected Prismatic Double-Rayleigh Beam System Having Arbitrary End Supports,” Chinese Journal of Mathematics, vol. 2017, pp. 1–30, 2017. View at Publisher · View at Google Scholar
  • Wei Sun, and Rong Liu, “Damping Optimization of Hard-Coating Thin Plate by the Modified Modal Strain Energy Method,” Coatings, vol. 7, no. 2, pp. 32, 2017. View at Publisher · View at Google Scholar
  • Yue Zhang, Wei Sun, and Jian Yang, “A New Finite Element Formulation for Nonlinear Vibration Analysis of the Hard-Coating Cylindrical Shell,” Coatings, vol. 7, no. 5, pp. 70, 2017. View at Publisher · View at Google Scholar
  • Andrea Tridello, Alessio D'Andrea, Davide S. Paolino, and Giovanni Belingardi, “A novel methodology for the assessment of the residual elastic properties in damaged composite components,” Composite Structures, vol. 161, pp. 435–440, 2017. View at Publisher · View at Google Scholar
  • Xiao Wang, Marco Morandini, and Pierangelo Masarati, “Velocity feedback damping of piezo-actuated wings,” Composite Structures, 2017. View at Publisher · View at Google Scholar
  • P.J. Maljaars, M.L. Kaminski, and J.H. den Besten, “Finite element modelling and model updating of small scale composite propellers,” Composite Structures, 2017. View at Publisher · View at Google Scholar
  • Francesco Tornabene, Nicholas Fantuzzi, and Michele Bacciocchi, “A new doubly-curved shell element for the free vibrations of arbitrarily shaped laminated structures based on Weak Formulation IsoGeometric Analysis,” Composite Structures, vol. 171, pp. 429–461, 2017. View at Publisher · View at Google Scholar
  • Salvatore Brischetto, “A general exact elastic shell solution for bending analysis of functionally graded structures,” Composite Structures, 2017. View at Publisher · View at Google Scholar
  • Qingshan Wang, Bin Qin, Dongyan Shi, and Qian Liang, “A semi-analytical method for vibration analysis of functionally graded carbon nanotube reinforced composite doubly-curved panels and shells of revolution,” Composite Structures, 2017. View at Publisher · View at Google Scholar
  • Xiaoqian Mao, Mengfan Li, Wei Li, Linwei Niu, Bin Xian, Ming Zeng, and Genshe Chen, “Progress in EEG-Based Brain Robot Interaction Systems,” Computational Intelligence and Neuroscience, vol. 2017, pp. 1–25, 2017. View at Publisher · View at Google Scholar
  • Bartlomiej Blachowski, Yonghui An, Billie F. Spencer, and Jinping Ou, “Axial Strain Accelerations Approach for Damage Localization in Statically Determinate Truss Structures,” Computer-Aided Civil and Infrastructure Engineering, vol. 32, no. 4, pp. 304–318, 2017. View at Publisher · View at Google Scholar
  • B. Faverjon, B. Puig, and T.N. Baranger, “Identification of boundary conditions by solving Cauchy problem in linear elasticity with material uncertainties,” Computers & Mathematics with Applications, 2017. View at Publisher · View at Google Scholar
  • X.Q. Liang, Q. Gao, and W.A. Yao, “An efficient algorithm based on group theory and the Woodbury formula for the dynamic responses of periodic structures,” Computers & Structures, vol. 182, pp. 238–251, 2017. View at Publisher · View at Google Scholar
  • Amirhadi Alesadi, Marzieh Galehdari, and Saeed Shojaee, “Free vibration and buckling analysis of cross-ply laminated composite plates using Carrera's unified formulation based on Isogeometric approach,” Computers & Structures, vol. 183, pp. 38–47, 2017. View at Publisher · View at Google Scholar
  • Yuting Dai, Chao Yang, and Chaolei Wang, “Strategy for robust gust response alleviation of an aircraft model,” Control Engineering Practice, vol. 60, pp. 211–217, 2017. View at Publisher · View at Google Scholar
  • Alexander Veprik, and Vladimir Babitsky, “Ultra-light weight undamped tuned dynamic absorber for cryogenically cooled infrared electro-optic payload,” Cryogenics, vol. 83, pp. 22–30, 2017. View at Publisher · View at Google Scholar
  • Giorgia Simoneschi, Alessandro Geniola, Andrea M. de Leo, and Angelo Di Egidio, “On the seismic performances of rigid block-like structures coupled with an oscillating mass working as a TMD,” Earthquake Engineering & Structural Dynamics, 2017. View at Publisher · View at Google Scholar
  • Chao Jia, Yong Li, Mingyuan Lian, and Xiaoyong Zhou, “Jointed Surrounding Rock Mass Stability Analysis on an Underground Cavern in a Hydropower Station Based on the Extended Key Block Theory,” Energies, vol. 10, no. 4, pp. 563, 2017. View at Publisher · View at Google Scholar
  • Zainab Radeef, Chong Wen Tong, Ong Zhi Chao, and Khoo Shin Yee, “Energy Harvesting Based on a Novel Piezoelectric 0.7PbZn0.3Ti0.7O3-0.3Na2TiO3 Nanogenerator,” Energies, vol. 10, no. 5, pp. 646, 2017. View at Publisher · View at Google Scholar
  • Mahmoud El-Kafafy, Christof Devriendt, Patrick Guillaume, and Jan Helsen, “Automatic Tracking of the Modal Parameters of an Offshore Wind Turbine Drivetrain System,” Energies, vol. 10, no. 4, pp. 574, 2017. View at Publisher · View at Google Scholar
  • Sebastian Schommer, Jean Mahowald, Viet Ha Nguyen, Danièle Waldmann, Stefan Maas, Arno Zürbes, and Guido De Roeck, “Health Monitoring Based on Dynamic Flexibility Matrix: Theoretical Models versus <i>In-Situ</i> Tests,” Engineering, vol. 09, no. 02, pp. 37–67, 2017. View at Publisher · View at Google Scholar
  • Sy Dzung Nguyen, Huu-Vinh Ho, Thoi-Trung Nguyen, Nang Toan Truong, and Tae-Il Seo, “Novel fuzzy sliding controller for MRD suspensions subjected to uncertainty and disturbance,” Engineering Applications of Artificial Intelligence, vol. 61, pp. 65–76, 2017. View at Publisher · View at Google Scholar
  • Chirag Trivedi, “A review on fluid structure interaction in hydraulic turbines: A focus on hydrodynamic damping,” Engineering Failure Analysis, 2017. View at Publisher · View at Google Scholar
  • K. Avramov, and T. Raimberdiyev, “Bifurcations behavior of bending vibrations of beams with two breathing cracks,” Engineering Fracture Mechanics, 2017. View at Publisher · View at Google Scholar
  • Yun-Lai Zhou, and Magd Abdel Wahab, “Cosine based and extended transmissibility damage indicators for structural damage detection,” Engineering Structures, vol. 141, pp. 175–183, 2017. View at Publisher · View at Google Scholar
  • Giorgia Simoneschi, Andrea M. de Leo, and Angelo Di Egidio, “Effectiveness of oscillating mass damper system in the protection of rigid blocks under impulsive excitation,” Engineering Structures, vol. 137, pp. 285–295, 2017. View at Publisher · View at Google Scholar
  • Sandro Diord, Filipe Magalhães, Álvaro Cunha, and Elsa Caetano, “High spatial resolution modal identification of a stadium suspension roof: Assessment of the estimates uncertainty and of modal contributions,” Engineering Structures, vol. 135, pp. 117–135, 2017. View at Publisher · View at Google Scholar
  • K. Zhou, and Z.Y. Wu, “Strain gauge placement optimization for structural performance assessment,” Engineering Structures, vol. 141, pp. 184–197, 2017. View at Publisher · View at Google Scholar
  • Wen-Yu He, Wei-Xin Ren, and Songye Zhu, “Damage detection of beam structures using quasi-static moving load induced displacement response,” Engineering Structures, vol. 145, pp. 70–82, 2017. View at Publisher · View at Google Scholar
  • Ting Liu, Baiquan Lin, Wei Yang, Tong Liu, and Cheng Zhai, “An integrated technology for gas control and green mining in deep mines based on ultra-thin seam mining,” Environmental Earth Sciences, vol. 76, no. 6, 2017. View at Publisher · View at Google Scholar
  • Jinxing Lai, Siyue He, Junling Qiu, Jianxun Chen, Lixin Wang, Ke Wang, and Junbao Wang, “Characteristics of seismic disasters and aseismic measures of tunnels in Wenchuan earthquake,” Environmental Earth Sciences, vol. 76, no. 2, 2017. View at Publisher · View at Google Scholar
  • Eugene J. OBrien, Abdollah Malekjafarian, and Arturo González, “Application of empirical mode decomposition to drive-by bridge damage detection,” European Journal of Mechanics - A/Solids, vol. 61, pp. 151–163, 2017. View at Publisher · View at Google Scholar
  • Mariantonieta Gutierrez Soto, and Hojjat Adeli, “Recent advances in control algorithms for smart structures and machines,” Expert Systems, vol. 34, no. 2, pp. e12205, 2017. View at Publisher · View at Google Scholar
  • Md Sazzad Hossain, Ong Zhi Chao, Zubaidah Ismail, and Khoo Shin Yee, “A Comparative Study of Vibrational Response Based Impact Force Localization and Quantification Using Radial Basis Function Network and Multilayer Perceptron,” Expert Systems with Applications, 2017. View at Publisher · View at Google Scholar
  • M. Mirzaei, S. Tavakoli, and M. Najafi, “On the role of stress waves in dynamic rupture of cylindrical tubes,” Fatigue & Fracture of Engineering Materials & Structures, 2017. View at Publisher · View at Google Scholar
  • Joan R. Casas, and John James Moughty, “Bridge Damage Detection Based on Vibration Data: Past and New Developments,” Frontiers in Built Environment, vol. 3, 2017. View at Publisher · View at Google Scholar
  • Tomoki Sakurai, and Shin Morishita, “Seismic response reduction of a three-story building by an MR grease damper,” Frontiers of Mechanical Engineering, 2017. View at Publisher · View at Google Scholar
  • Masataku Sutoh, Sachiko Wakabayashi, and Takeshi Hoshino, “Motion Behaviors of Landing Gear for Lunar Probes in Atmosphere and Vacuum Tests,” IEEE Robotics and Automation Letters, vol. 2, no. 1, pp. 313–320, 2017. View at Publisher · View at Google Scholar
  • Yinlong Hu, Michael Z. Q. Chen, Shengyuan Xu, and Yuance Liu, “Semiactive Inerter and Its Application in Adaptive Tuned Vibration Absorbers,” IEEE Transactions on Control Systems Technology, vol. 25, no. 1, pp. 294–300, 2017. View at Publisher · View at Google Scholar
  • Saad Ilyas, Nizar Jaber, and Mohammad I. Younis, “A Coupled Resonator for Highly Tunable and Amplified Mixer/Filter,” IEEE Transactions on Electron Devices, pp. 1–6, 2017. View at Publisher · View at Google Scholar
  • Fabio Immovilli, and Marco Cocconcelli, “Experimental Investigation of Shaft Radial Load Effect on Bearing Fault Signatures Detection,” IEEE Transactions on Industry Applications, vol. 53, no. 3, pp. 2721–2729, 2017. View at Publisher · View at Google Scholar
  • Adam Santos, Reginaldo Santos, Moises Silva, Eloi Figueiredo, Claudomiro Sales, and Joao C. W. A. Costa, “A Global Expectation–Maximization Approach Based on Memetic Algorithm for Vibration-Based Structural Damage Detection,” IEEE Transactions on Instrumentation and Measurement, vol. 66, no. 4, pp. 661–670, 2017. View at Publisher · View at Google Scholar
  • Arsalan Habib Khawaja, and Qi Huang, “Estimating Sag and Wind-Induced Motion of Overhead Power Lines With Current and Magnetic-Flux Density Measurements,” IEEE Transactions on Instrumentation and Measurement, vol. 66, no. 5, pp. 897–909, 2017. View at Publisher · View at Google Scholar
  • Ki Bum Lee, Sejune Cheon, and Chang Ouk Kim, “A Convolutional Neural Network for Fault Classification and Diagnosis in Semiconductor Manufacturing Processes,” IEEE Transactions on Semiconductor Manufacturing, vol. 30, no. 2, pp. 135–142, 2017. View at Publisher · View at Google Scholar
  • Gonzalo Aguirre Dominguez, Mitsuhiro Kamezaki, and Shigeki Sugano, “Proposal and Preliminary Feasibility Study of a Novel Toroidal Magnetorheological Piston,” IEEE/ASME Transactions on Mechatronics, vol. 22, no. 2, pp. 657–668, 2017. View at Publisher · View at Google Scholar
  • Abdulwahed Salem, Ahmed Abu-Siada, and Syed Islam, “Improved condition monitoring technique for wind turbine gearbox and shaft stress detection,” IET Science, Measurement & Technology, 2017. View at Publisher · View at Google Scholar
  • Adam Glowacz, and Zygfryd Glowacz, “Diagnosis of the three-phase induction motor using thermal imaging,” Infrared Physics & Technology, vol. 81, pp. 7–16, 2017. View at Publisher · View at Google Scholar
  • Weipeng Hu, Qingjun Li, Xianhong Jiang, and Zichen Deng, “Coupling dynamic behaviors of spatial flexible beam with weak damping,” International Journal for Numerical Methods in Engineering, 2017. View at Publisher · View at Google Scholar
  • Nicholas Fantuzzi, Francesco Tornabene, Michele Bacciocchi, Ana M. A. Neves, and Antonio J. M. Ferreira, “Stability and accuracy of three Fourier expansion-based strong form finite elements for the free vibration analysis of laminated composite plates,” International Journal for Numerical Methods in Engineering, 2017. View at Publisher · View at Google Scholar
  • Huixuan Han, Ding Zhou, and Tianjian Ji, “Mechanical Parameters of Standing Body and Applications in Human–Structure Interaction,” International Journal of Applied Mechanics, vol. 09, no. 02, pp. 1750021, 2017. View at Publisher · View at Google Scholar
  • C. Kleinbach, and J. Fehr, “Optimal deceleration of surrogate models in a generic side impact set-up,” International Journal of Crashworthiness, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Ekin Ozer, and Maria Q Feng, “Biomechanically influenced mobile and participatory pedestrian data for bridge monitoring,” International Journal of Distributed Sensor Networks, vol. 13, no. 4, pp. 155014771770524, 2017. View at Publisher · View at Google Scholar
  • Hesheng Tang, Dawei Li, Jingjing Li, and Songtao Xue, “Epistemic uncertainty quantification in metal fatigue crack growth analysis using evidence theory,” International Journal of Fatigue, 2017. View at Publisher · View at Google Scholar
  • Qiang Gao, and Haichao Cui, “An efficient and accurate method for transient heat conduction in 1D periodic structures,” International Journal of Heat and Mass Transfer, vol. 108, pp. 1535–1550, 2017. View at Publisher · View at Google Scholar
  • Z. Rosenberg, R. Kositski, and E. Dekel, “Comment on: “Rigid and eroding projectile penetration into concrete targets based on an extended cavity expansion model” by Kong et al. Int. J. Impact Eng. (2017),” International Journal of Impact Engineering, vol. 104, pp. A1–A3, 2017. View at Publisher · View at Google Scholar
  • Fangxiang Wang, Ruihe Wang, Weidong Zhou, and Guichun Chen, “Numerical simulation and experimental verification of the rock damage field under particle water jet impacting,” International Journal of Impact Engineering, vol. 102, pp. 169–179, 2017. View at Publisher · View at Google Scholar
  • Marco Sasso, Michele Gabrio Antonelli, Edoardo Mancini, Mario Radoni, and Dario Amodio, “Experimental and numerical characterization of a polymeric Hopkinson bar by DTMA,” International Journal of Impact Engineering, vol. 103, pp. 50–63, 2017. View at Publisher · View at Google Scholar
  • A. Goel, T. Uth, H.N.G. Wadley, and V.S. Deshpande, “Effect of surface properties on momentum transfer to targets impacted by high-velocity sand slugs,” International Journal of Impact Engineering, 2017. View at Publisher · View at Google Scholar
  • Feng Lin, and Yu Zhang, “An impulse-based model for impact between two concrete blocks,” International Journal of Impact Engineering, 2017. View at Publisher · View at Google Scholar
  • Jing Zhang, Xing Hua Shi, and C. Guedes Soares, “Experimental study on the response of multi-layered protective structure subjected to underwater contact explosions,” International Journal of Impact Engineering, vol. 100, pp. 23–34, 2017. View at Publisher · View at Google Scholar
  • Éric Markiewicz, Bertrand Langrand, and Delphine Notta-Cuvier, “A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution,” International Journal of Impact Engineering, 2017. View at Publisher · View at Google Scholar
  • Abhishek Rajput, and M.A. Iqbal, “Ballistic performance of plain, reinforced and pre-stressed concrete slabs under normal impact by an ogival-nosed projectile,” International Journal of Impact Engineering, 2017. View at Publisher · View at Google Scholar
  • Quanhui Wu, Yazhou Sun, Wanqun Chen, and Guoda Chen, “Theoretical and experimental investigation of spindle axial drift and its effect on surface topography in ultra-precision diamond turning,” International Journal of Machine Tools and Manufacture, vol. 116, pp. 107–113, 2017. View at Publisher · View at Google Scholar
  • S. Brischetto, F. Tornabene, N. Fantuzzi, and M. Bacciocchi, “Interpretation of boundary conditions in the analytical and numerical shell solutions for mode analysis of multilayered structures,” International Journal of Mechanical Sciences, vol. 122, pp. 18–28, 2017. View at Publisher · View at Google Scholar
  • Jiahao Shi, Qinghua Song, Zhanqiang Liu, and Yi Wan, “Formulating a numerically low-cost method of a constrained layer damper for vibration suppression in thin-walled component milling and experimental validation,” International Journal of Mechanical Sciences, 2017. View at Publisher · View at Google Scholar
  • Sara Fattahian Dehkordi, and Yaghoub Tadi Beni, “Electro-mechanical free vibration of single-walled piezoelectric/flexoelectric nano cones using consistent couple stress theory,” International Journal of Mechanical Sciences, 2017. View at Publisher · View at Google Scholar
  • Ali Jafarian, and Ahmadreza Pishevar, “An exact multiphase Riemann solver for compressible cavitating flows,” International Journal of Multiphase Flow, vol. 88, pp. 152–166, 2017. View at Publisher · View at Google Scholar