Texture, Stress, and Microstructure

Texture Investigations on High Temperature Superconductors

Examination of the Iterative Series-Expansion Method for Quantitative Texture Analysis

Model Calculations of the Recrystallization Texture Formatio in α-Iron

Texture and Microstructure in Hot-Pressed

Influence of the Initial Grain Size on the Rolling and Recrystallization Textures in the Alloy Al-1.8% Cu

Axisymmetric Textures in Alumina

Texture Formed by Platelet Alignment in Ceramic Platelet Ceramic Matrix Composites

Development of Texture in an ELC-BH Sheet With Very High -Value During Annealing

Calculation of Effective Elastic Moduli of Textured Materials

Texture and Microstructure Development in -Platelet Reinforced Laminates Produced by Centrifugal Consolidation

Calculating Deformation Textures for Cubic Polycrystals

Modelling of Texture Development and Deformation Mechanisms in a Ti20V Alloy Using a Self Consistent Polycrystal Approach

On the Possible Mechanisms of the Formation of Piezoelectric Active Rocks With Crystallographic Textures

Characterization of Microstructure and Texture of a Titanium Alloy Corona 5

Plane Strain Deformation Textures of -

Texture, Stress, and Microstructure

Table of Contents

Table of Contents: 1995

Texture Investigations on High Temperature Superconductors

Examination of the Iterative Series-Expansion Method for Quantitative Texture Analysis

Model Calculations of the Recrystallization Texture Formatio in α-Iron

Texture and Microstructure in Hot-Pressed

Influence of the Initial Grain Size on the Rolling and Recrystallization Textures in the Alloy Al-1.8% Cu

Axisymmetric Textures in Alumina

Texture Formed by Platelet Alignment in Ceramic Platelet Ceramic Matrix Composites

Development of Texture in an ELC-BH Sheet With Very High -Value During Annealing

Calculation of Effective Elastic Moduli of Textured Materials

Texture and Microstructure Development in -Platelet Reinforced Laminates Produced by Centrifugal Consolidation

Calculating Deformation Textures for Cubic Polycrystals

Modelling of Texture Development and Deformation Mechanisms in a Ti20V Alloy Using a Self Consistent Polycrystal Approach

On the Possible Mechanisms of the Formation of Piezoelectric Active Rocks With Crystallographic Textures

Characterization of Microstructure and Texture of a Titanium Alloy Corona 5

Plane Strain Deformation Textures of -