Texture, Stress, and Microstructure

Interlaboratories Tests of Textures of Zircaloy-4 Tubes. Part 1: Pole Figure Measurements and Calculation of Kearns Coefficients

Development of a {111} Recrystallization Texture Associated With Dynamic Strain Aging During Hot Rolling in the Ferrite Region

Texture Investigations on High Temperature Superconductors

The Smoothing of the Orientation Distribution Density Introduced by Calculation Methods

On the Use of Polycrystal and Individual Orientation Texture Analysis Methods for BCC Materials

On the Stress Dependence of Subgrain Size

Calculation of Yield Surfaces and Determination of Forming Limit Diagrams of Aluminium Alloys

Examination of the Iterative Series-Expansion Method for Quantitative Texture Analysis

In-Plane Texturing in Sputtered Films

Effects of Grain Size on Rolling and Annealing Textures in 82%–92% Cold Rolled -Brass

Optimization of Texture Measurements. IV. The Influence of the Grain-Size Distribution on the Quality of Texture Measurements

Calculating Extrusion Textures of the Alloy Mn-Al-C

Texture of Cold-Rolled β-Titanium Alloys With Additions of Hydrogen

A Microstructure Investigation of the Deformation and Recrystallization of Particle-Containing Aluminium-Silicon Alloys

Pole Figures From Time-of-Flight Measurements Using Neutrons of a Pulsed Spallation Source

Texture, Stress, and Microstructure

Table of Contents

Table of Contents

Interlaboratories Tests of Textures of Zircaloy-4 Tubes. Part 1: Pole Figure Measurements and Calculation of Kearns Coefficients

Development of a {111} Recrystallization Texture Associated With Dynamic Strain Aging During Hot Rolling in the Ferrite Region

Texture Investigations on High Temperature Superconductors

The Smoothing of the Orientation Distribution Density Introduced by Calculation Methods

On the Use of Polycrystal and Individual Orientation Texture Analysis Methods for BCC Materials

On the Stress Dependence of Subgrain Size

Calculation of Yield Surfaces and Determination of Forming Limit Diagrams of Aluminium Alloys

Examination of the Iterative Series-Expansion Method for Quantitative Texture Analysis

In-Plane Texturing in Sputtered Films

Effects of Grain Size on Rolling and Annealing Textures in 82%–92% Cold Rolled -Brass

Optimization of Texture Measurements. IV. The Influence of the Grain-Size Distribution on the Quality of Texture Measurements

Calculating Extrusion Textures of the Alloy Mn-Al-C

Texture of Cold-Rolled β-Titanium Alloys With Additions of Hydrogen

A Microstructure Investigation of the Deformation and Recrystallization of Particle-Containing Aluminium-Silicon Alloys

Pole Figures From Time-of-Flight Measurements Using Neutrons of a Pulsed Spallation Source