Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 3803472, 8 pages
http://dx.doi.org/10.1155/2016/3803472
Research Article

Modeling of Flow Stress of 2026 Al Alloy under Hot Compression

1School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
2Collaborative Innovation Center of Advanced Nonferrous Structural Materials and Manufacturing, Central South University, Changsha 410083, China
3Light Alloy Research Institute, Central South University, Changsha 410012, China

Received 25 February 2016; Accepted 17 July 2016

Academic Editor: Sutasn Thipprakmas

Copyright © 2016 Zheng-bing Xiao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Zheng-bing Xiao, Yuan-chun Huang, and Yu Liu, “Modeling of Flow Stress of 2026 Al Alloy under Hot Compression,” Advances in Materials Science and Engineering, vol. 2016, Article ID 3803472, 8 pages, 2016. doi:10.1155/2016/3803472