Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 3803472, 8 pages
http://dx.doi.org/10.1155/2016/3803472
Research Article

Modeling of Flow Stress of 2026 Al Alloy under Hot Compression

1School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
2Collaborative Innovation Center of Advanced Nonferrous Structural Materials and Manufacturing, Central South University, Changsha 410083, China
3Light Alloy Research Institute, Central South University, Changsha 410012, China

Received 25 February 2016; Accepted 17 July 2016

Academic Editor: Sutasn Thipprakmas

Copyright © 2016 Zheng-bing Xiao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Łukaszek-Sołek and J. Krawczyk, “The analysis of the hot deformation behaviour of the Ti-3Al-8V-6Cr-4Zr-4Mo alloy, using processing maps, a map of microstructure and of hardness,” Materials & Design, vol. 65, pp. 165–173, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. T.-D. Kil, J.-M. Lee, and Y.-H. Moon, “Quantitative formability estimation of ring rolling process by using deformation processing map,” Journal of Materials Processing Technology, vol. 220, pp. 224–230, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Saadatkia, H. Mirzadeh, and J.-M. Cabrera, “Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels,” Materials Science and Engineering: A, vol. 636, pp. 196–202, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Mirzadeh, J. M. Cabrera, and A. Najafizadeh, “Constitutive relationships for hot deformation of austenite,” Acta Materialia, vol. 59, no. 16, pp. 6441–6448, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. M. El Mehtedi, F. Gabrielli, and S. Spigarelli, “Hot workability in process modeling of a bearing steel by using combined constitutive equations and dynamic material model,” Materials & Design, vol. 53, pp. 398–404, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. M. El Mehtedi, F. Musharavati, and S. Spigarelli, “Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation,” Materials and Design, vol. 54, pp. 869–873, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. T.-H. Pham, J. J. Kim, and S.-E. Kim, “Estimating constitutive equation of structural steel using indentation,” International Journal of Mechanical Sciences, vol. 90, pp. 151–161, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. C.-L. Gan, K.-H. Zheng, W.-J. Qi, and M.-J. Wang, “Constitutive equations for high temperature flow stress prediction of 6063 Al alloy considering compensation of strain,” Transactions of Nonferrous Metals Society of China (English Edition), vol. 24, no. 11, Article ID 63492, pp. 3486–3491, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Liu, Z. Yao, Y. Ning et al., “The flow behavior and constitutive equation in isothermal compression of FGH4096-GH4133B dual alloy,” Materials and Design, vol. 63, pp. 829–837, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Peng, H. Guo, Z. Shi, C. Qin, and Z. Zhao, “Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain rate and temperature,” Materials and Design, vol. 50, pp. 198–206, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. C. Lin and X.-M. Chen, “A critical review of experimental results and constitutive descriptions for metals and alloys in hot working,” Materials & Design, vol. 32, no. 4, pp. 1733–1759, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. D. Samantaray, C. Phaniraj, S. Mandal, and A. K. Bhaduri, “Strain dependent rate equation to predict elevated temperature flow behavior of modified 9Cr-1Mo (P91) steel,” Materials Science and Engineering: A, vol. 528, no. 3, pp. 1071–1077, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. N. Haghdadi, A. Zarei-Hanzaki, and H. R. Abedi, “The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain,” Materials Science and Engineering A, vol. 535, pp. 252–257, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. B.-J. Lv, J. Peng, D.-W. Shi, A.-T. Tang, and F.-S. Pan, “Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg-2.0Zn-0.3Zr alloy based on true stress-strain curves,” Materials Science and Engineering A, vol. 560, pp. 727–733, 2013. View at Publisher · View at Google Scholar
  15. M. Zhou, Y. C. Lin, J. Deng, and Y.-Q. Jiang, “Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy,” Materials & Design, vol. 59, pp. 141–150, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Mirzadeh, “Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions,” Mechanics of Materials, vol. 85, pp. 66–79, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. C. M. Sellars, “The kinetics of softening processes during hot working of austenite,” Czechoslovak Journal of Physics B, vol. 35, no. 3, pp. 239–248, 1985. View at Publisher · View at Google Scholar · View at Scopus
  18. C. M. Sellars and W. J. McTegart, “On the mechanism of hot deformation,” Acta Metallurgica, vol. 14, no. 9, pp. 1136–1138, 1966. View at Publisher · View at Google Scholar · View at Scopus
  19. C. Zener and J. H. Hollomon, “Effect of strain rate upon plastic flow of steel,” Journal of Applied Physics, vol. 15, no. 1, pp. 22–32, 1944. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Z. Quan, Y. Tong, G. Luo, and J. Zhou, “A characterization for the flow behavior of 42CrMo steel,” Computational Materials Science, vol. 50, no. 1, pp. 167–171, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. L.-Z. Wu, X.-S. Li, J. Chen, H.-B. Zhang, and Z.-S. Cui, “Predicting critical conditions and stress-strain curves for dynamic recrystallization in SPHC steel,” Journal of Iron and Steel Research International, vol. 17, no. 7, pp. 51–57, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. I. Mejía, A. Bedolla-Jacuinde, C. Maldonado, and J. M. Cabrera, “Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels,” Materials Science and Engineering: A, vol. 528, no. 12, pp. 4133–4140, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. N. Park, A. Shibata, D. Terada, and N. Tsuji, “Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni–0.1C steel,” Acta Materialia, vol. 61, no. 1, pp. 163–173, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. C. Lin, M.-S. Chen, and J. Zhong, “Constitutive modeling for elevated temperature flow behavior of 42CrMo steel,” Computational Materials Science, vol. 42, no. 3, pp. 470–477, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. C. Lin, M.-S. Chen, and J. Zhong, “Microstructural evolution in 42CrMo steel during compression at elevated temperatures,” Materials Letters, vol. 62, no. 14, pp. 2136–2139, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. Y.-C. Lin, M.-S. Chen, and J. Zhang, “Modeling of flow stress of 42CrMo steel under hot compression,” Materials Science and Engineering: A, vol. 499, no. 1-2, pp. 88–92, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. C. Lin, M.-S. Chen, and J. Zhong, “Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process,” Computational Materials Science, vol. 43, no. 4, pp. 1117–1122, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. M. I. A. E. Aal, “Influence of the pre-homogenization treatment on the microstructure evolution and the mechanical properties of Al–Cu alloys processed by ECAP,” Materials Science and Engineering: A, vol. 528, no. 22-23, pp. 6946–6957, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. J.-H. Jang, D.-G. Nam, Y.-H. Park, and I.-M. Park, “Effect of solution treatment and artificial aging on microstructure and mechanical properties of Al–Cu alloy,” Transactions of Nonferrous Metals Society of China, vol. 23, no. 3, pp. 631–635, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. C. Giummarra, G. H. Bray, and D. J. Duquette, “Fretting fatigue in 2XXX series aerospace aluminium alloys,” Tribology International, vol. 39, no. 10, pp. 1206–1212, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Chen, M. Weyland, and C. R. Hutchinson, “The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys,” Acta Materialia, vol. 61, no. 15, pp. 5877–5894, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. H. C. Fang, H. Chao, and K. H. Chen, “Effect of Zr, Er and Cr additions on microstructures and properties of Al-Zn-Mg-Cu alloys,” Materials Science and Engineering A, vol. 610, pp. 10–16, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. D. F. Lam, C. C. Menzemer, and T. S. Srivatsan, “A study to evaluate and understand the response of aluminum alloy 2026 subjected to tensile deformation,” Materials & Design, vol. 31, no. 1, pp. 166–175, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. X. Huang, H. Zhang, Y. Han, W. Wu, and J. Chen, “Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature,” Materials Science and Engineering A, vol. 527, no. 3, pp. 485–490, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. F. J. Humphreys and M. Hatherly, “The deformed state,” in Recrystallization and Related Annealing Phenomena, F. J. H. Hatherly, Ed., chapter 2, p. 11, Elsevier, New York, NY, USA, 2004. View at Google Scholar
  36. Z. Q. Sheng and R. Shivpuri, “Modeling flow stress of magnesium alloys at elevated temperature,” Materials Science and Engineering A, vol. 419, no. 1-2, pp. 202–208, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. R. E. Smallman and R. J. BiShop, “Chapter 7—mechanical behaviour of materials,” in Modern Physical Metallurgy and Materials Engineering, pp. 197–258, Butterworth-Heinemann, Boston, Mass, USA, 6th edition, 1999. View at Publisher · View at Google Scholar