Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 5618427, 12 pages
http://dx.doi.org/10.1155/2016/5618427
Research Article

Characterization of Various Plant-Produced Asphalt Concrete Mixtures Using Dynamic Modulus Test

1Military College of Engineering, National University of Sciences & Technology (NUST), Risalpur Campus, Risalpur 24080, Pakistan
2Department of Civil, Environmental, and Construction Engineering, University of Central Florida (UCF), 12800 Pegasus Drive No. 211, Orlando, FL 32816-2450, USA
3National Institute of Transportation, School of Civil and Environment Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan

Received 7 January 2016; Accepted 18 February 2016

Academic Editor: Osman Gencel

Copyright © 2016 Muhammad Irfan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. AASHTO, Standard Test Method for Determining Dynamic Modulus of Hot-Mix Asphalt (HMA), TP 62-07, American Association of State Highway and Transportation Officials, Washington, DC, USA, 2007.
  2. Y. H. Huang, Pavement Analysis and Design, Pearson Education, New Jersey, NJ, USA, 2004.
  3. F. Bonnaure, G. Gest, A. Gravois, and P. Uge, “A new method of predicting the stiffness of asphalt paving mixtures,” in Proceedings of the Association of Asphalt Paving Technologists, vol. 46, pp. 64–104, San Antionio, Tex, USA, February 1977.
  4. R. C. Timothy, L. Xingjun, O. M. Mihai, and L. S. Eugene, “Dynamic and resilient modulus of Mn/DOT asphalt mixtures,” Report, Department of Civil Engineering, University of Minnesota, Minneapolis, Minn, USA, 2003. View at Google Scholar
  5. Y. R. Kim, M. King, and M. Momen, “Typical dynamic moduli values of hot mix asphalt in North Carolina and their prediction,” in Proceedings of the 84th Annual Meeting of the Transportation Research Board, Paper no. 05-2568, TRB, National Research Council, Washington, DC, USA, January 2005.
  6. G. W. Flinstch, A. Loulizi, S. D. Diefenderfer, K. A. Galal, and B. K. Diefenderfer, “Asphalt materials characterization in support of implementation of the proposed mechanistic-empirical pavement design guide,” Virginia Department of Transportation Final Report VTRC 07-CR10, 2007. View at Google Scholar
  7. S. A. Cross, Y. Jakatimath, and K. C. Sumesh, Determination of Dynamic Modulus Master Curves for Oklahoma HMA Mixtures, FHWA Publication FHWA/OK 07 (05), US Department of Transportation, Washington, DC, USA, 2007.
  8. L. Tashman and M. A. Elangovan, “Dynamic modulus test—laboratory investigation and future implementation in the State of Washington,” Final Research Report WA-RD 704.1, Washington State Department of Transportation Final Report, 2007. View at Google Scholar
  9. L. N. Mohammad, S. Saadeh, S. Obulareddy, and S. Cooper, “Characterization of louisiana asphalt mixtures using simple performance tests,” in Proceedings of the 86th Annual Meeting of the Transportation Research Board, TRB, National Research Council, May 2007.
  10. T. Bennert and N. Aboobaker, “Dynamic modulus of hot mix asphalt,” Report FHWA-NJ-2009-011, US Department of Transportation, Washington, DC, USA, 2009. View at Google Scholar
  11. R. F. Bonaquist, “Wisconsin mixture characterization using the asphalt mixture performance tester (AMPT) on historical aggregate structure,” Wisconsin Department of Transportation Final Report WHRP 09-03, Wisconsin Department of Transportation, Pewaukee, Wis, USA, 2010. View at Google Scholar
  12. D. S. Gedafa, M. Hossain, S. Romanoschi, and A. J. Gisi, “Field verification of superpave dynamic modulus,” Journal of Materials in Civil Engineering, vol. 22, no. 5, Article ID 011005QMT, pp. 485–494, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Bayat and M. Knight, “Investigation of hot-mix asphalt dynamic modulus by means of field-measured pavement response,” Transportation Research Record, vol. 2154, pp. 138–145, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Jackson, J. A. Li, I. Zofka, I. Yut, and J. Mahoney, “Establishing default dynamic modulus values for New England,” New England Transportation Consortium Final Report NETCR85, 2011. View at Google Scholar
  15. S. Goh, Z. You, R. Williams, and X. Li, “Preliminary dynamic modulus criteria of HMA for field rutting of asphalt pavements: Michigan’s experience,” Journal of Transportation Engineering, vol. 137, no. 1, pp. 37–45, 2011. View at Publisher · View at Google Scholar
  16. Y. Kim, J. Lee, C. Baek, S. Yang, S. Kwon, and Y. Suh, “Performance evaluation of warm- and hot-mix asphalt mixtures based on laboratory and accelerated pavement tests,” Advances in Materials Science and Engineering, vol. 2012, Article ID 901658, 9 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. S. El-Badawy, A. Awed, and F. Bayomy, “Evaluation of the MEPDG dynamic modulus prediction models for asphalt concrete mixtures,” in Proceedings of the Transportation and Development Institute Congress, pp. 576–585, Chicago, Ill, USA, March 2011.
  18. C. Plati, K. Georgouli, and A. Loizos, “Asphalt concrete stiffness modulus estimation utilizing an algorithm approach,” in Proceedings of the Airfield and Highway Pavement, pp. 1219–1228, Los Angeles, Calif, USA, June 2013. View at Publisher · View at Google Scholar
  19. K. Lee, H. Kim, and N. Kim, “Dynamic modulus of asphalt mixtures for development of korean pavement design guide,” ASTM Journal of Testing and Evaluation, vol. 35, no. 2, pp. 28–59, 2007. View at Google Scholar
  20. S. El-Badawy, F. Bayomy, and A. Awed, “Performance of MEPDG dynamic modulus predictive models for asphalt concrete mixtures: local calibration for Idaho,” Journal of Materials in Civil Engineering, vol. 24, no. 12, pp. 1412–1421, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. Y.-H. Cho, D.-W. Park, and S.-D. Hwang, “A predictive equation for dynamic modulus of asphalt mixtures used in Korea,” Construction and Building Materials, vol. 24, no. 4, pp. 513–519, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. A. M. Khattab, S. M. El-Badawy, A. A. Al Hazmi, and M. Elmwafi, “Evaluation of Witczak E predictive models for the implementation of AASHTOWare-pavement ME design in the Kingdom of Saudi Arabia,” Construction and Building Materials, vol. 64, pp. 360–369, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. D. W. Christensen Jr., T. Pellinen, and R. F. Bonaquist, “Hirsch model for estimating the modulus of asphalt concrete,” Journal of the Association of Asphalt Paving Technologists from the Proceedings of the Technical Sessions, vol. 72, pp. 97–121, 2003. View at Google Scholar
  24. Z. Hossain and M. Zaman, “Behavior of selected warm mix asphalt additive modified binders and prediction of dynamic modulus of the mixes,” Journal of Testing and Evaluation, vol. 41, no. 1, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Bari and M. W. Witczak, “Development of a new revised version of the Witczak E predictive model for hot mix asphalt mixtures,” Journal of the Association of Asphalt Paving Technologists, vol. 75, pp. 381–423, 2006, Proceedings of the Technical Sessions. View at Google Scholar
  26. ASTM, Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing, ASTM International, West Conshohocken, Pa, USA, 2014, http://www.astm.org.
  27. National Highway Authority (NHA), General Specifications, National Highway Authority (NHA), Islamabad. Pakistan, 1998.
  28. ASTM, “Standard practice for preparation of bituminous mixture specimens for dynamic modulus testing,” Tech. Rep. ASTM 3496-99, ASTM International, West Conshohocken, Pa, USA, 2007. View at Google Scholar
  29. R. F. Bonaquist, “Refining the simple performance tester for use in routine practice,” NCHRP Report 614, Transportation Research Board, National Research Council, Washington, DC, USA, 2008. View at Google Scholar
  30. T. K. Pellinen and M. W. Witczak, “Stress dependent master curve construction for dynamic (complex) modulus,” in Proceedings of the Annual Meeting of the Association of Asphalt Paving Technologists, Colorado Springs, Colo, USA, March 2002.
  31. D. Andrei, M. W. Witczak, and W. Mirza, “Appendix CC-4: development of a revised predictive model for the dynamic (complex) modulus of asphalt mixtures. Development of the 2002 guide for the design of new and rehabilitated pavement structures,” Final Document NCHRP 1-37A, 1999. View at Google Scholar
  32. S. Yousefdoost, B. Vuong, I. Rickards, P. Armstrong, and B. Sullivan, “Evaluation of dynamic modulus predictive models for typical Australian asphalt mixes,” in Proceedings of the 15th AAPA International Flexible Pavements Conference, Brisbane, Australia, September 2013.
  33. M. W. Witczak and O. A. Fonseca, “Revised predictive model for dynamic (complex) modulus of asphalt mixtures,” Transportation Research Record, no. 1540, pp. 15–23, 1996. View at Google Scholar · View at Scopus