Texture, Stress, and Microstructure

Effect of Hot Rolling Condition on Texture of Cold Rolled and Annealed Ultra-Low-Carbon Steel Sheet

Microstructure and Texture Evolution During the Annealing of Cold-worked Zr-1 wt%Nb

Correlation Beetween Size-Strain Pole and Figure and Texture

Effect of Whiskers and Small Particles on the Deformation and Recrystallization Texture of Aluminium

Microstructure and Microtexture Development During High Temperature Low Cycle Fatigue

On the Major Factors Affecting Goss Texture Development in Grain Oriented Silicon Steel

Hot Rolling Textures in Ferritic Steels and Texture Development in the Following Processing Stages

The Influnce of Carbide Distribution on Texture Formation in a Fast Annealed Aℓ-Killed Stell

Influence of Subsurface Layers on Goss-Texture Development in Secondary Recrystallization of RGO Electrical Steel Sheet

The Effect of Measurement Geometry for on-Line Texture Analyzing Systems

The Influence of Temperature on the Rolling Textures of Al Alloys in the Absence of Recrystallization

Development of an X-Ray Technique for Measuring Grain Size as a Function of Orientation in Polycrystalline Materials

Model of Secondary Recrystallization in Silicon-Iron and Comparison With Experiments

X-Ray Measurement of Residual Stresses in Textured Thin Coatings

Automated Determination of Lattice Orientation From Electron Backscattered Kikuchi Diffraction Patterns

Texture, Stress, and Microstructure

Table of Contents

Table of Contents: 1991

Effect of Hot Rolling Condition on Texture of Cold Rolled and Annealed Ultra-Low-Carbon Steel Sheet

Microstructure and Texture Evolution During the Annealing of Cold-worked Zr-1 wt%Nb

Correlation Beetween Size-Strain Pole and Figure and Texture

Effect of Whiskers and Small Particles on the Deformation and Recrystallization Texture of Aluminium

Microstructure and Microtexture Development During High Temperature Low Cycle Fatigue

On the Major Factors Affecting Goss Texture Development in Grain Oriented Silicon Steel

Hot Rolling Textures in Ferritic Steels and Texture Development in the Following Processing Stages

The Influnce of Carbide Distribution on Texture Formation in a Fast Annealed Aℓ-Killed Stell

Influence of Subsurface Layers on Goss-Texture Development in Secondary Recrystallization of RGO Electrical Steel Sheet

The Effect of Measurement Geometry for on-Line Texture Analyzing Systems

The Influence of Temperature on the Rolling Textures of Al Alloys in the Absence of Recrystallization

Development of an X-Ray Technique for Measuring Grain Size as a Function of Orientation in Polycrystalline Materials

Model of Secondary Recrystallization in Silicon-Iron and Comparison With Experiments

X-Ray Measurement of Residual Stresses in Textured Thin Coatings

Automated Determination of Lattice Orientation From Electron Backscattered Kikuchi Diffraction Patterns