Advances in Materials Science and Engineering

Table of Contents

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 6658968
  • - Research Article

Optimization of Surface Roughness in Drilling Medium-Density Fiberboard with a Parallel Robot

Elmas Aşkar Ayyıldız | Mustafa Ayyıldız | Fuat Kara
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 8870282
  • - Research Article

Effect of Cyclic Cryogenic Treatment on Wear Resistance, Impact Toughness, and Microstructure of 42CrMo Steel and Its Optimization

Haidong Zhang | Xianguo Yan | ... | Zhi Chen
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 6658588
  • - Research Article

Effect of Sodium Aluminate Dosage as a Solid Alkaline Activator on the Properties of Alkali-Activated Slag Paste

Bin Chen | Jun Wang | Jinyou Zhao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 8834598
  • - Research Article

Effect of Dry-Wet Cycles and Freeze-Thaw Cycles on the Antierosion Ability of Fiber-Reinforced Loess

Changgen Yan | Ning An | ... | Weifeng Sun
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 6611868
  • - Research Article

Failure Mode Analysis of Carbon Fiber Composite Laminates by Acoustic Emission Signals

Xinye Liu | Xinyue Yao | ... | Wingkong Chiu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 6638505
  • - Research Article

Constitutive Characteristics, Microstructure, and Texture Evolution of As-Cast 42CrMo Alloy in Nonisothermal Multipass Compression

Fangcheng Qin | Huiping Qi | ... | Zhengbing Meng
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5783256
  • - Research Article

Evaluation of the Physical and Adhesive Properties of Natural Weathering Asphalt

Yanzhu Wang | Xudong Wang | ... | Lei Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 6651452
  • - Research Article

Effect of Internal Curing with Superabsorbent Polymers on Bond Behavior of High-Strength Concrete

Xiao Lei | Rui Wang | ... | Yanni Bao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 8682163
  • - Review Article

Review of Experimental Studies on Application of FRP for Strengthening of Bridge Structures

Wenliang Hu | Yuan Li | Haoyun Yuan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 1345920
  • - Research Article

Rural Masonry Isolating Structure and LRB Experiment: Seismic Resistance Properties and Statistical Data Curve Analyses

Jiayao Zheng
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 3284975
  • - Research Article

Effects of Sand Powder on Sulfuric Acid Resistance, Compressive Strength, Cost Benefits, and CO2 Reduction of High CaO Fly Ash Concrete

Surachet Wanna | Warangkana Saengsoy | ... | Somnuk Tangtermsirikul
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 6758059
  • - Research Article

Influence of Particle Orientation on the Performance of Geogrid Reinforced Ballast

Jian-bin Zhao | Jie Li | ... | Jun Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 6625273
  • - Research Article

Rolling Bearing Fault Diagnosis Based on Stacked Autoencoder Network with Dynamic Learning Rate

Hong Pan | Wei Tang | ... | Maxime Binama
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 6683429
  • - Research Article

Axial Compression Behaviors of the Steel Tube Confined Reinforced Concrete Columns with Binding Bars

Hao Hu | Zhengliang Li | ... | Junfeng Tang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 6635507
  • - Research Article

Enhanced Mechanical Properties of Mg-6Sn-3Al-1Zn Alloy with Bimodal Grain Size Disturbed in the Microstructure Uniformly through Changing the Rolling Temperature

Fuan Wei | Jinhui Wang | ... | Bo Shi
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.000
Impact Factor1.271
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.