logo

Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents: 2021

Table of Contents

Table of Contents: 2021

  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5573372
  • - Research Article

Surface Settlement Analysis Induced by Shield Tunneling Construction in the Loess Region

Caihui Zhu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5534526
  • - Research Article

Prefabricated Urban Underground Utility Tunnels: A Case Study on Mechanical Behaviour with Strain Monitoring and Numerical Simulation

Yonggang Xiao | Jubing Zhang | ... | Changhong Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5569091
  • - Research Article

Progressive Failure and Acoustic Emission Characteristics of Red Sandstone with Different Geometry Parallel Cracks under Uniaxial Compression Loading

Xizhen Sun | Fanbao Meng | ... | He Jiang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 7429310
  • - Research Article

Co-Effects of Graphene Oxide and Cement on Geotechnical Properties of Loess

Dongbo Li | Pengbo Lei | ... | Wei Lu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5512782
  • - Research Article

Flexural Behavior of Innovative Posttensioned Composite Beams with Corrugated Steel Webs

Xiang Li | Tao Yang | ... | Taosheng Shen
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 6637200
  • - Research Article

Experimental Study on Acoustic Emission and Resistivity Response of Sandstone under Constant Amplitude Cyclic Loading

Kui Wang | Xue Li | ... | Mingjie Zhao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 8898693
  • - Research Article

Effects of Process Parameters on Geometrical Characteristics and Microstructure of TiC Particle-Reinforced Co50 Alloy by Laser Cladding

Nga Pham Thi-Hong
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 6693326
  • - Research Article

Study of Nonlinear Deformation of FCC-AuCuSi under Pressure by the Statistical Moment Method

Nguyen Quang Hoc | Bui Duc Tinh | ... | Gelu Coman
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 8534954
  • - Research Article

A Fatigue Evaluation Method for Radial Tire Based on Strain Energy Density Gradient

Chen Liang | Zhi Gao | ... | Jieyu Ren
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5538059
  • - Research Article

Numerical Simulation of Effects of River Reconstruction on Flooding: A Case Study of the Ba River, China

Haixiao Jing | Yongbiao Lang | ... | Zongxiao Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 2838605
  • - Research Article

Study on Soil Spring Model for Pipe and Silty Clay Interaction Based on Physical Model Test

Liyun Li | Junyan Han | Xiangjian Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 8837384
  • - Research Article

Effect of Notch on Strain Rate Concentration Factor of 304 Stainless Steel Bar

Zhengyang Yu | Bin Zhong | ... | Lei Ma
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2021
  • - Article ID 5541181
  • - Research Article

Effect of Thermal Parameters on Hydration Heat Temperature and Thermal Stress of Mass Concrete

Yuqin Zhao | Gaosheng Li | ... | Yongtao Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 8855565
  • - Research Article

Investigation on the Influences of Curing Time on the Cracking Resistance of Semiflexible Pavement Mixture

Hua Tan | Zijia Xiong | ... | Jinxiang Hong
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2021
  • - Article ID 6678297
  • - Research Article

Effect of Particle Size and Sintering Temperature on the Formation of Mullite from Kyanite and Aluminum Mixtures

F. R. Barrientos-Hernández | M. Pérez-Labra | ... | J. P. Hernández-Lara
Advances in Materials Science and Engineering
Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
See full report
APC$2550
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.