Advances in Materials Science and Engineering

Effect of Hemp Fibre Surface Treatment on the Fibre-Matrix Interface and the Influence of Cellulose, Hemicellulose, and Lignin Contents on Composite Strength Properties

Experimental Study on the Impact Resistance of Closed-Cell Aluminum Foam Protective Materials to RC Piers under Lateral Impact

Statistical Modelling to Study the Implications of Coated Tools for Machining AA 2014 Using Grey Taguchi-Based Response Surface Methodology

Performance of Cracked Ultra-High-Performance Fiber-Reinforced Concrete Exposed to Dry-Wet Cycles of Chlorides

Study on the Rock Fracture during Fluid Injection Using a Coupled Flow-Stress-Damage (FSD) Model: Insight into the Stress Shadow Effect

The Ontology-Based Approach Supporting Holistic Energy-Tunnel Design considering Cost, Heat Flux, and System Feasibility

Formation Mechanism of Preferential Flow Paths and Seepage Characteristics of a Novel Growable Pile for Heap Leaching of Rare Earth

Evaluation of Mechanical Properties of Sisal and Bamboo Fibres Reinforced with Polymer Matrix Composites Prepared by Compression Moulding Process

Alkali-Active Sand Slate Powder for Use as Mineral Admixture in Mass Hydraulic Concrete: Technical and Economic Analysis

Effect of CaO on the Autogenous Shrinkage of Alkali-Activated Slag Mortar

Mespilus germanica (MG) and Tribulus terrestris (TT) Used as Biosorbents for Lead Removal from Aqueous Solutions: Adsorption Kinetics and Mechanisms

Study on Mesoscale Damage Evolution Characteristics of Irregular Sandstone Particles Based on Digital Images and Fractal Theory

Research on the Interaction Mechanism between Landslide and Tunnel Engineering

Natural Jute Fibre-Reinforced Polymer Composite System for Posttensioned Beam Strengthening in Flexure

Tribological Behavior and Analysis on Surface Roughness of CNC Milled Dual Heat Treated Al6061 Composites

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2021

Effect of Hemp Fibre Surface Treatment on the Fibre-Matrix Interface and the Influence of Cellulose, Hemicellulose, and Lignin Contents on Composite Strength Properties

Experimental Study on the Impact Resistance of Closed-Cell Aluminum Foam Protective Materials to RC Piers under Lateral Impact

Statistical Modelling to Study the Implications of Coated Tools for Machining AA 2014 Using Grey Taguchi-Based Response Surface Methodology

Performance of Cracked Ultra-High-Performance Fiber-Reinforced Concrete Exposed to Dry-Wet Cycles of Chlorides

Study on the Rock Fracture during Fluid Injection Using a Coupled Flow-Stress-Damage (FSD) Model: Insight into the Stress Shadow Effect

The Ontology-Based Approach Supporting Holistic Energy-Tunnel Design considering Cost, Heat Flux, and System Feasibility

Formation Mechanism of Preferential Flow Paths and Seepage Characteristics of a Novel Growable Pile for Heap Leaching of Rare Earth

Evaluation of Mechanical Properties of Sisal and Bamboo Fibres Reinforced with Polymer Matrix Composites Prepared by Compression Moulding Process

Alkali-Active Sand Slate Powder for Use as Mineral Admixture in Mass Hydraulic Concrete: Technical and Economic Analysis

Effect of CaO on the Autogenous Shrinkage of Alkali-Activated Slag Mortar

Mespilus germanica (MG) and Tribulus terrestris (TT) Used as Biosorbents for Lead Removal from Aqueous Solutions: Adsorption Kinetics and Mechanisms

Study on Mesoscale Damage Evolution Characteristics of Irregular Sandstone Particles Based on Digital Images and Fractal Theory

Research on the Interaction Mechanism between Landslide and Tunnel Engineering

Natural Jute Fibre-Reinforced Polymer Composite System for Posttensioned Beam Strengthening in Flexure

Tribological Behavior and Analysis on Surface Roughness of CNC Milled Dual Heat Treated Al6061 Composites