logo

Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents

Table of Contents

Table of Contents

  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 7210591
  • - Research Article

Effect of High-Temperature Curing Methods on the Compressive Strength Development of Concrete Containing High Volumes of Ground Granulated Blast-Furnace Slag

Wonsuk Jung | Se-Jin Choi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 2703264
  • - Research Article

Effectiveness of Saturated Coral Aggregate and Shrinkage Reducing Admixture on the Autogenous Shrinkage of Ultrahigh Performance Concrete

Jinming Liu | Zhongwen Ou | ... | Wei Deng
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 8260103
  • - Research Article

The Effect of Water Repellent Surface Impregnation on Durability of Cement-Based Materials

Peng Zhang | Huaishuai Shang | ... | Tiejun Zhao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 3186371
  • - Research Article

Estimation of Corrosion-Free Life for Concrete Containing Ground Granulated Blast-Furnace Slag under a Chloride-Bearing Environment

Sung In Hong | Ki Yong Ann
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 1651753
  • - Research Article

Evaluating the Dynamic Elastic Modulus of Concrete Using Shear-Wave Velocity Measurements

Byung Jae Lee | Seong-Hoon Kee | ... | Yun-Yong Kim
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 5086418
  • - Research Article

Effect of Solidification Rate and Rare Earth Metal Addition on the Microstructural Characteristics and Porosity Formation in A356 Alloy

M. G. Mahmoud | A. M. Samuel | ... | F. H. Samuel
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 6384859
  • - Research Article

Effects of Shrinkage Reducing Agent and Expansive Admixture on the Volume Deformation of Ultrahigh Performance Concrete

Su Anshuang | Qin Ling | ... | Li Zhaoyu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 5294290
  • - Research Article

Flexural and Shear Behaviors of Reinforced Alkali-Activated Slag Concrete Beams

Kwang-Myong Lee | Sung Choi | ... | Sung-Won Yoo
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 3968578
  • - Research Article

The Effect of Crack Width on Chloride-Induced Corrosion of Steel in Concrete

Weiwei Li | Weiqing Liu | Shuguang Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 7802024
  • - Research Article

Effect of Freeze-Thaw Cycles on the Internal Structure and Performance of Semirigid Base Materials

Yiqi Wang | Yiqiu Tan | ... | Xinglong Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 9324271
  • - Research Article

Testing of Microalloyed Steel Quality under Creep Conditions for a New Intended Use

Mária Mihaliková | Kristína Zgodavová | Anna Lišková
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 6913835
  • - Research Article

Dielectric Properties of 3D Printed Polylactic Acid

Claudius Dichtl | Pit Sippel | Stephan Krohns
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 8280317
  • - Research Article

Shear Strength Reduction Factor of Prestressed Hollow-Core Slab Units Based on the Reliability Approach

Hae-Chang Cho | Min-Kook Park | ... | Kang Su Kim
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 2715092
  • - Research Article

Development of Electrohydraulic Forming Process for Aluminum Sheet with Sharp Edge

Ji-Yeon Shim | Bong-Yong Kang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 6925215
  • - Corrigendum

Corrigendum to “Electropolished Titanium Implants with a Mirror-Like Surface Support Osseointegration and Bone Remodelling”

Cecilia Larsson Wexell | Furqan A. Shah | ... | Peter Thomsen
Advances in Materials Science and Engineering
Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
See full report
APC$2550
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.