logo

Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents

Table of Contents

Table of Contents

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 6582739
  • - Research Article

A Characterization for the Deformation Behavior of As-Cast P91 Alloy Steel and Utilization in Hot Extrusion Process

Lu Jia | Yongtang Li | Yang Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 1759469
  • - Research Article

Fabrication of Metal Nanoparticle Arrays in the ZrO2(Y), HfO2(Y), and GeOx Films by Magnetron Sputtering

Oleg Gorshkov | Ivan Antonov | ... | Mikhail Kudryashov
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 5853687
  • - Research Article

Combustion and Mechanical Properties of Polymer-Modified Cement Mortar at High Temperature

Hyung-Jun Kim | Won-Jun Park
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 3495150
  • - Research Article

The Influence of Different Parameter on the Seismic Behavior of SRUHSC Frame

Yingchao Ma | Jinqing Jia
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 7643960
  • - Research Article

Influence of Cement Type and Water-to-Cement Ratio on the Formation of Thaumasite

Ailian Zhang | Linchun Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 1691465
  • - Research Article

Statistical Model for the Mechanical Properties of Al-Cu-Mg-Ag Alloys at High Temperatures

A. M. Al-Obaisi | E. A. El-Danaf | ... | A. N. Alhazaa
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 2784303
  • - Research Article

Catalytic Synthesis and Antifungal Activity of New Polychlorinated Natural Terpenes

Hana Ighachane | Brahim Boualy | ... | Hassan Bihi Lazrek
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 9647458
  • - Research Article

Inkjet Printing as High-Throughput Technique for the Fabrication of NiCo2O4 Films

Reyna Dianela Bacelis-Martínez | Gerko Oskam | ... | Miguel Angel Ruiz-Gómez
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 2031631
  • - Research Article

Theoretical Study of High-Frequency Response of InGaAs/AlAs Double-Barrier Nanostructures

Konstantin S. Grishakov | Vladimir F. Elesin | ... | Konstantin P. Katin
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 4101503
  • - Research Article

Application of Conductive Materials to Asphalt Pavement

Hai Viet Vo | Dae-Wook Park
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 4065434
  • - Research Article

Effect of Reduction in Thickness and Rolling Conditions on Mechanical Properties and Microstructure of Rolled Mg-8Al-1Zn-1Ca Alloy

Yuta Fukuda | Masafumi Noda | ... | Yasumasa Chino
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 1210673
  • - Research Article

Adsorption Equilibrium for Heavy Metal Divalent Ions (Cu2+, Zn2+, and Cd2+) into Zirconium-Based Ferromagnetic Sorbent

Agnes Yung Weng Lee | Soh Fong Lim | ... | Mohammad Omar Abdullah
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 3679323
  • - Research Article

Deformation Characteristics of Ultrahigh-Strength Concrete under Unrestrained and Restrained States

Joo-Ha Lee | Kwang-Mo Lim | ... | Nam-Hyoung Lim
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2017
  • - Article ID 3431093
  • - Research Article

Experimental Investigation of Delamination Growth in Composite Laminates under a Compressive Load

A. Riccio | R. Cristiano | ... | C. Toscano
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2017
  • - Article ID 1735268
  • - Research Article

Synergistic Sintering of Lignite Fly Ash and Steelmaking Residues towards Sustainable Compacted Ceramics

V. G. Karayannis | A. K. Moutsatsou | ... | A. E. Domopoulou
Advances in Materials Science and Engineering
Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
See full report
APC$2550
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.