logo

Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents

Table of Contents

Table of Contents

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 2913032
  • - Research Article

A New Appliance for Improving the Miniscrew Stability

Nurhat Ozkalayci | Mehmet Yetmez
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 5368635
  • - Research Article

Measurement of Surface Damage through Boundary Detection: An Approach to Assess Durability of Cementitious Composites under Tannery Wastewater

Tanvir Manzur | Khaled Mahmood Ehsan | ... | Samira Mahmud
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 4971312
  • - Research Article

Model Tests on the Retaining Walls Constructed from Geobags Filled with Construction Waste

Hua Wen | Jiu-jiang Wu | ... | Chengzhuang Gu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 9014317
  • - Research Article

Mathematical Model of Homogeneous Corrosion of Steel Pipe Pile Foundation for Offshore Wind Turbines and Corrosive Action

Kui Wang | Ming-jie Zhao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 1704594
  • - Research Article

Bias Magnetic Field of Stack Giant Magnetostrictive Actuator: Design, Analysis, and Optimization

Zhaoshu Yang | Zhongbo He | ... | Ce Rong
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 8451391
  • - Research Article

Mechanism Underlying Bonding Water Film Effect on Rheological Parameters

Yiyan Lv | Wei Zhu | Tingting Han
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 6920725
  • - Research Article

Experimental and Analytical Investigation Based on 1/2 Scale Model for a Cleanroom Unit Module Consisting of Steel Section and Reinforced Concrete

Sijun Kim | Se Woon Choi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 6534648
  • - Research Article

Effects of Morphology and Topology on the Effective Stiffness of Chiral Cellular Materials in the Transverse Plane

Alp Karakoç | Ertuǧrul Taciroǧlu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 7456182
  • - Research Article

Emergency Communication and Quick Seismic Damage Investigation Based on Smartphone

Ruicong Han | Xuefeng Zhao | ... | Jinping Ou
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 5690272
  • - Research Article

Damage Simulation of a Random Aggregate Model Induced by Microwave under Different Discontinuous Ratios and Exposure Times

Yang Tang | Guobin Xu | ... | Yu Duan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 7079698
  • - Research Article

The Static and Dynamic Mechanical Properties of Magnetorheological Silly Putty

Fei Guo | Cheng-bin Du | ... | Run-pu Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 2372835
  • - Research Article

Calculation of Constrained Stress in Expansive Mortar with a Composite Creep Model

Hyeonggil Choi | Bongsuk Cho
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 4964828
  • - Review Article

An Overview of Nanomaterials for Water and Wastewater Treatment

Haijiao Lu | Jingkang Wang | ... | Hongxun Hao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 5927609
  • - Research Article

Effect of Polypropylene and Basalt Fiber on the Behavior of Mortars for Repair Applications

Chaohua Jiang | Shanshan Huang | ... | Da Chen
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 7078045
  • - Research Article

Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding

Fouad Fareh | Vincent Demers | ... | Orlando Scalzo
Advances in Materials Science and Engineering
Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
See full report
APC$2550
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.