Advances in Materials Science and Engineering

Table of Contents: 2015

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 626429
  • - Research Article

TiC0.5N0.5-Based Cermets with Varied Amounts of Si3N4 Nanopowders Prepared by Spark Plasma Sintering

Changchun Lv | Zhijian Peng | ... | Chengbiao Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 315397
  • - Research Article

Effect of Pore Size on the Biodegradation Rate of Silk Fibroin Scaffolds

Zuwei Luo | Qin Zhang | ... | Mingzhong Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 180187
  • - Research Article

Temperature and pH Responsive Microfibers for Controllable and Variable Ibuprofen Delivery

Toan Tran | Mariana Hernandez | ... | Ji Wu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 718207
  • - Research Article

Synthesis of Micro- and Nanoparticles of Metal Oxides and Their Application for Reinforcement of Al-Based Alloys

S. Vorozhtsov | I. Zhukov | ... | A. Kvetinskaya
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 146476
  • - Research Article

Effect of Nanosized NiF2 Addition on the Transport Critical Current Density of Ag-Sheathed (Bi1.6Pb0.4)Sr2Ca2Cu3O10 Superconductor Tapes

M. Hafiz | R. Abd-Shukor
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 650769
  • - Research Article

Computational Approach in Formulating Mechanical Characteristics of 3D Star Honeycomb Auxetic Structure

Mozafar Shokri Rad | Zaini Ahmad | Amran Alias
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 485626
  • - Research Article

Ostwald Ripening Process of Coherent β′ Precipitates during Aging in Fe0.75Ni0.10Al0.15 and Fe0.74Ni0.10Al0.15Cr0.01 Alloys

N. Cayetano-Castro | M. L. Saucedo-Muñoz | ... | V. M. Lopez-Hirata
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 410830
  • - Research Article

Magnetic Properties and Core Loss Behavior of Fe-6.5wt.%Si Ribbons Prepared by Melt Spinning

S. Wang | Y. M. Jiang | ... | J. P. Lin
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 953130
  • - Research Article

Correlation of Grain Size, Stacking Fault Energy, and Texture in Cu-Al Alloys Deformed under Simulated Rolling Conditions

Ehab A. El-Danaf | Mahmoud S. Soliman | Ayman A. Al-Mutlaq
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 376151
  • - Research Article

The Phase-Formation Behavior of Composite Ceramic Powders Synthesized by Utilizing Rice Husk Ash from the Biomass Cogeneration Plant

Wenjie Yuan | Mingyu Fan | ... | Hongxi Zhu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 318289
  • - Research Article

Analysis of Disturbing Influence of Traffic Load on Soil Body

Janat Musayev | Algazy Zhauyt
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 430156
  • - Research Article

A Precipitation Phenomenon of Titanium Compounds in Aluminum Melts and the Refinement Fading Mechanism of the Al-5Ti-0.62C Master Alloy

Wanwu Ding | Wenjun Zhao | Tiandong Xia
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 849253
  • - Research Article

Experimental Study on Dry Friction Damping Characteristics of the Steam Turbine Blade Material with Nonconforming Contacts

Jun Wu | Ruishan Yuan | ... | Yonghui Xie
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 358746
  • - Research Article

Microstructures and Toughening of TiC-TiB2 Ceramic Composites with Cr-Based Alloy Phase Prepared by Combustion Synthesis in High-Gravity Field

Xuegang Huang | Chun Yin | ... | Junyan Wu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 702548
  • - Research Article

Optimized Design of an ECAP Die Using the Finite Element Method for Obtaining Nanostructured Materials

Patricia Ponce-Peña | Edgar López-Chipres | ... | María Azucena González-Lozano
Advances in Materials Science and Engineering
 Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
 Submit Evaluate your manuscript with the free Manuscript Language Checker

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.