Advances in Materials Science and Engineering

Table of Contents: 2015

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 705306
  • - Research Article

Investigation of Corrosion Behaviour of Aluminium Alloy Subjected to Laser Shock Peening without a Protective Coating

U. Trdan | J. Grum
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 693834
  • - Research Article

Model for Sulfate Diffusion Depth in Concrete under Complex Aggressive Environments and Its Experimental Verification

Yingwu Zhou | Hao Tian | ... | Lili Sui
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2015
  • - Article ID 423065
  • - Research Article

Experimental Study to Determine the Failure Criteria of Concrete at Its Early-Age

Hongyan Ding | Lei Zhang | Puyang Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 290593
  • - Research Article

Element Analysis Based on Energy-Dispersive X-Ray Fluorescence

Min Yao | Dongyue Wang | Min Zhao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 934587
  • - Review Article

Photocatalysis and Bandgap Engineering Using ZnO Nanocomposites

Muhammad Ali Johar | Rana Arslan Afzal | ... | Umair Manzoor
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 425827
  • - Research Article

Effect of Short-Term Aging Process on the Moisture Susceptibility of Asphalt Mixtures and Binders Containing Sasobit Warm Mix Additive

Bo Li | Jinyu Yang | ... | Liangying Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 348691
  • - Research Article

Freeze-Thaw Performance and Moisture-Induced Damage Resistance of Base Course Stabilized with Slow Setting Bitumen Emulsion-Portland Cement Additives

Mojtaba Shojaei Baghini | Amiruddin Ismail
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2015
  • - Article ID 287143
  • - Research Article

Preparation and Characterization of Amorphous B Powders by Salt-Assisted SHS Technique

Yujing Ou | Peiqing La | ... | Yalong Zhu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 381704
  • - Research Article

Influence of Bottom Ash Replacements as Fine Aggregate on the Property of Cellular Concrete with Various Foam Contents

Patchara Onprom | Krit Chaimoon | Raungrut Cheerarot
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 458949
  • - Research Article

A Simple-to-Implement Simulator for the Reactive Extrusion of Poly(Lactic Acid) in a Corotating Uniform Twin-Screw Extruder

René O. Vargas | J. Esteban López-Aguilar | ... | Francisco López-Serrano
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 731056
  • - Research Article

Durability Study on High Calcium Fly Ash Based Geopolymer Concrete

Ganesan Lavanya | Josephraj Jegan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 597841
  • - Research Article

Research and Correlation of Diagnostic Methods for Assessment of the State of Oil Filling in Cycloid Gearbox

Petr Baron | Marek Kočiško | ... | Tomáš Cmorej
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 384902
  • - Research Article

Analysis of Compressive Toughness and Deformability of High Ductile Fiber Reinforced Concrete

Mingke Deng | Jian Han | ... | Xingwen Liang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 214585
  • - Review Article

Influence of Antioxidant-Enhanced Polymers in Bitumen Rheology and Bituminous Concrete Mixtures Mechanical Performance

Samer Dessouky | Mohammad Ilias | ... | In Tai Kim
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2015
  • - Article ID 393582
  • - Research Article

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Yueyun Zhou | Lifa Luo | ... | Yi Chen
Advances in Materials Science and Engineering
 Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
 Submit Evaluate your manuscript with the free Manuscript Language Checker

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.