logo

Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents: 2019

Table of Contents

Table of Contents: 2019

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 9170756
  • - Research Article

Experimental Study on Macro-Mesoscopic Components and Indexes of Buton Gilsonite-Modified Asphalt

Sanqiang Yang | Xiaoyu Zhou | ... | Yongli Cai
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 2960435
  • - Research Article

Structural Design of Mechanical Property for Biodegradable Polymeric Stent

Yunbo Wei | Minjie Wang | ... | Yifei Jin
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 5838361
  • - Research Article

Evaluation of the Mechanical Properties of Porous Thermoplastic Polyurethane Obtained by 3D Printing for Protective Gear

Hyojeong Lee | Ran-i Eom | Yejin Lee
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 3732160
  • - Research Article

Optimization and Hydration Mechanism of Composite Cementing Material for Paste Filling in Coal Mines

Jinxiao Liu | Wenxin Li | ... | Yongle Liu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 5809657
  • - Research Article

Research on the Dynamic Mechanical Properties and Energy Dissipation of Expansive Soil Stabilized by Fly Ash and Lime

Sheng-quan Zhou | Da-wei Zhou | ... | Dongwei Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 6753658
  • - Research Article

Sustainable Development of Corrosion Inhibitors from Electronic Scrap: Synthesis and Electrochemical Performance

J. Porcayo-Calderon | J.J. Ramos-Hernandez | ... | L. Martinez-Gomez
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 4081632
  • - Research Article

Study on Simulation of Stamping Process and Optimization of Process Parameters of Fender

Peng Wu | Youming Wang | Peng Wan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2019
  • - Article ID 8920718
  • - Research Article

Strengthening and Rehabilitation of U-Shaped RC Bridges Using Substitute Cable Ducts

Adam Svoboda | Ladislav Klusáček | Martin Olšák
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 8930134
  • - Research Article

Research on Multipass Hot Spinning Process Technology of AZ80 Magnesium Alloy Shell

Wei Liang | Lin Guan | ... | Zhigang Xing
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 2413613
  • - Research Article

Bond Properties of RAC-Filled Square Steel Tubes after High Temperature

Wanjie Zou | Jiongfeng Liang | ... | Haifeng Yang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 9804825
  • - Research Article

Experimental Study on the Influence of Moisture Content during Gas Depressurization Extraction

Yuexia Chen | Xuexi Chen | ... | Tingxiang Chu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 6104049
  • - Research Article

Characteristics of A6061/(Glass Fibre + AL2O3 + SiC + B4C) Reinforced Hybrid Composite Prepared through STIR Casting

Subramani Nanjan | Ganesh Murali Janakiram
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 5137092
  • - Research Article

Analysis of the Sedimentation Characteristics of Ultrafine Tailings Based on an Orthogonal Experiment

Chang-hong Li | Yue-qi Shi | ... | Ning Guo
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 4868506
  • - Research Article

Synthesis and Characterization of CeGdZn-Ferrite Nanoparticles as Magnetic Hyperthermia Application Agents

Saleh S. Hayek
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 1237105
  • - Research Article

Experimental Study on Normal Frost-Heave Force Generated from Loess upon Freezing considering Multiple Factors

Zai-kun Zhao | Tie-hang Wang | ... | Yu Zhang
Advances in Materials Science and Engineering
Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
See full report
APC$2550
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.