Advances in Materials Science and Engineering

Table of Contents: 2016

  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 5607386
  • - Research Article

Development of a Master Sintering Curve for Al-Mg Alloy

Yong-Shin Lee | Sang-Jun Lee | ... | Duck Jae Yoon
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 1712383
  • - Research Article

Thermoluminescence Properties of Novel Self-Agglomerating CaSO4:Eu Phosphors Obtained by an Environmentally Friendly Method

A. R. García-Haro | R. Bernal | ... | V. M. Castaño
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 7645954
  • - Research Article

Fractal Modeling of Pore Structure and Ionic Diffusivity for Cement Paste

Yun Gao | Jin-yang Jiang | Kai Wu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 6523878
  • - Research Article

Mechanical and Durability Evaluation of Concrete with Sulfate Solution Corrosion

Feng Ming | You-sheng Deng | Dong-qing Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 1570983
  • - Research Article

Stability of Slopes Reinforced with Truncated Piles

Shu-Wei Sun | Fu Zhao | Kui Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 9675604
  • - Research Article

On Finite Element Computations of Contact Problems in Micropolar Elasticity

Victor A. Eremeyev | Andrzej Skrzat | Feliks Stachowicz
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 3951703
  • - Research Article

Synthesis of Silicon-Containing Chitosan Hydrogels in a Glycolic Acid Medium

A. B. Shipovskaya | O. N. Malinkina | ... | S. M. Rogacheva
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 1280894
  • - Review Article

Salt Damage and Rising Damp Treatment in Building Structures

J. M. P. Q. Delgado | A. S. Guimarães | ... | Robert Černý
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 4159258
  • - Research Article

Extrudability and Consolidation of Blends between CGM and DDGS

C. J. R. Verbeek | Kurt A. Rosentrater
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 2721859
  • - Research Article

Evaluation of Sustainable Structural Concrete Using Recycled Aggregate and Aramid Fiber Sheet

Y. S. Cho | H. S. Jang | ... | Y. T. Lee
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 8014704
  • - Research Article

Design Method and Cost-Benefit Analysis of Hybrid Fiber Used in Asphalt Concrete

Haiwei Zhang | Peiwen Hao | ... | Aaron D. Mwanza
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 3025213
  • - Research Article

Experimental Study on Hygrothermal Deformation of External Thermal Insulation Cladding Systems with Glazed Hollow Bead

Houren Xiong | Jinming Xu | ... | Shimeng Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 4913536
  • - Research Article

Steel Fibres: Effective Way to Prevent Failure of the Concrete Bonded with FRP Sheets

V. Gribniak | A. K. Arnautov | ... | A. Sokolov
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 7691535
  • - Research Article

Effect of Sr-P Interaction on the Microstructure and Tensile Properties of A413.0 Type Alloys

A. M. Samuel | H. W. Doty | ... | F. H. Samuel
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 4259846
  • - Research Article

Influence of Shape Anisotropy on Magnetization Dynamics Driven by Spin Hall Effect

X. G. Li | Z. J. Liu | ... | W. N. Fu
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.300
Journal Citation Indicator0.240
Impact Factor1.726
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.