logo

Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents: 2014

Table of Contents

Table of Contents: 2014

  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2014
  • - Article ID 196732
  • - Research Article

Design and Simulated Characteristics of Nanosized InSb Based Heterostructure Devices

T. D. Subash | T. Gnanasekaran | ... | J. Jagannathan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 863148
  • - Research Article

Performance Evaluation of Stone Mastic Asphalt and Hot Mix Asphalt Mixtures Containing Recycled Concrete Aggregate

Mohammad Saeed Pourtahmasb | Mohamed Rehan Karim
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 409086
  • - Research Article

Degradation of Tetracycline by Birnessite under Microwave Irradiation

Meng Liu | Guocheng Lv | ... | Libing Liao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 240879
  • - Research Article

Effects of Electric Pulse Current on the Aging Kinetics of 2219 Aluminum Alloy

Jiao Zhang | Lihua Zhan | Shufeng Jia
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 626850
  • - Research Article

Effect of PVA-co-MMA Copolymer on the Physical, Mechanical, and Thermal Properties of Tropical Wood Materials

Md. Saiful Islam | Sinin Hamdan | ... | M. Jawaid
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 752586
  • - Research Article

Numerical Simulation and Response of Stiffened Plates Subjected to Noncontact Underwater Explosion

Elsayed Fathallah | Hui Qi | ... | Mahmoud Helal
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2014
  • - Article ID 129540
  • - Research Article

Preparation of N-Doped TiO2-ZrO2 Composite Films under Electric Field and Heat Treatment and Assessment of Their Removal of Methylene Blue from Solution

Lefu Mei | Ranfang Zuo | ... | Hao Ding
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 605204
  • - Research Article

Improving the Efficiency Enhancement of Photonic Crystal Based InGaN Solar Cell by Using a GaN Cap Layer

T. F. Gundogdu | M. Gökkavas | E. Ozbay
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 485267
  • - Research Article

Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill

N. Masmiati | H. S. Chan | ... | M. Hamdi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 863230
  • - Research Article

Tribological Behavior of Si3N4/Ti3SiC2 Contacts Lubricated by Lithium-Based Ionic Liquids

Haizhong Wang | Zenghong Song | ... | Jinjun Lu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 871749
  • - Research Article

Sintering Behavior and Mechanical Properties of Biphasic Calcium Phosphate Ceramics

Mehmet Yetmez
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 963042
  • - Research Article

Fabrication of Porous and Nanoporous Aluminum via Selective Dissolution of Al-Zn Alloys

Oscar Marcelo Suárez | Elvin G. Estremera | ... | Arturo J. Hernández-Maldonado
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2014
  • - Article ID 491930
  • - Research Article

Numerical Simulation Procedure for Modeling TGO Crack Propagation and TGO Growth in Thermal Barrier Coatings upon Thermal-Mechanical Cycling

Ding Jun | Huang Xia | ... | Yang E-Chuan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 945297
  • - Research Article

Evaluation of Concrete Durability Performance with Sodium Silicate Impregnants

Sang-Soon Park | Yun Yong Kim | ... | Seung-Jun Kwon
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2014
  • - Article ID 861465
  • - Research Article

Investigation on the Crack Initiation of V-Shaped Notch Tip in Precision Cropping

Lijun Zhang | Shengdun Zhao | Zhenwei Wang
Advances in Materials Science and Engineering
Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
See full report
APC$2550
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.