International Journal of Rotating Machinery

Table of Contents

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2015
  • - Article ID 729140
  • - Research Article

Simulation of a Centrifugal Pump by Using the Harmonic Balance Method

Franco Magagnato | Jinfeng Zhang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2015
  • - Article ID 531209
  • - Research Article

Establishment of Approximate Analytical Model of Oil Film Force for Finite Length Tilting Pad Journal Bearings

Yongliang Wang | Yu Gao | ... | Zhansheng Liu
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2015
  • - Article ID 716241
  • - Editorial

Advances in Measurement Techniques for Turbomachinery Flow, Heat Transfer, and Acoustics

Nekkanti Sitaram | Giovanni Maria Carlomagno | ... | Mark McQuilling
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2015
  • - Article ID 376967
  • - Research Article

A Time Efficient Adaptive Gridding Approach and Improved Calibrations in Five-Hole Probe Measurements

Jason Town | Cengiz Camci
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2015
  • - Article ID 198534
  • - Research Article

Detection of Rotor Forced Response Vibrations Using Stationary Pressure Transducers in a Multistage Axial Compressor

William L. Murray | Nicole L. Key
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2015
  • - Article ID 315036
  • - Research Article

Conjugate Heat Transfer Study of Combined Impingement and Showerhead Film Cooling Near NGV Leading Edge

Dileep Chandran | Bhamidi Prasad
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2015
  • - Article ID 146272
  • - Research Article

Experimental Investigation of Factors Influencing Operating Rotor Tip Clearance in Multistage Compressors

Reid A. Berdanier | Nicole L. Key
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2015
  • - Article ID 890414
  • - Review Article

Some Experimental Investigations on Gas Turbine Cooling Performed with Infrared Thermography at Federico II

T. Astarita | G. Cardone | ... | G. M. Carlomagno
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2015
  • - Article ID 650783
  • - Research Article

Turbulent Kinetic Energy Production in the Vane of a Low-Pressure Linear Turbine Cascade with Incoming Wakes

V. Michelassi | J. G. Wissink
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2014
  • - Article ID 710450
  • - Research Article

Heat Transfer and Friction Studies in a Tilted and Rib-Roughened Trailing-Edge Cooling Cavity with and without the Trailing-Edge Cooling Holes

M. E. Taslim | J. S. Halabi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2014
  • - Article ID 126843
  • - Research Article

Comparison of Common Methods in Dynamic Response Predictions of Rotor Systems with Malfunctions

Hongliang Yao | Qian Zhao | ... | Bangchun Wen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2014
  • - Article ID 275916
  • - Research Article

Influence of Spatially Varying Flow on the Dynamic Response of a Waterjet inside an SES

Michael R. Motley | Brant R. Savander | Yin L. Young
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2014
  • - Article ID 838627
  • - Research Article

Effect of Blade Outlet Angle on Unsteady Hydrodynamic Force of Closed-Type Centrifugal Pump with Single Blade

Yasuyuki Nishi | Junichiro Fukutomi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2014
  • - Article ID 961452
  • - Research Article

An Air Jet Distortion Generation System

M. Sivapragasam | S. Ramamurthy | ... | P. White
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2014
  • - Article ID 625876
  • - Research Article

Improvement of Moderately Loaded Transonic Axial Compressor Performance Using Low Porosity Bend Skewed Casing Treatment

Dilipkumar Bhanudasji Alone | S. Satish Kumar | ... | Venkat S. Iyengar
International Journal of Rotating Machinery
 Journal metrics
See full report
Acceptance rate15%
Submission to final decision91 days
Acceptance to publication19 days
CiteScore2.300
Journal Citation Indicator0.290
Impact Factor0.9
 Submit Evaluate your manuscript with the free Manuscript Language Checker

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.