International Journal of Rotating Machinery

Table of Contents: 2016

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 3792645
  • - Research Article

A New Adaptive Control for Five-Phase Fault-Tolerant Flux-Switching Permanent Magnet Motor

Hongyu Tang | Wenxiang Zhao | Chenyu Gu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 5390360
  • - Research Article

The Design Method of Axial Flow Runners Focusing on Axial Flow Velocity Uniformization and Its Application to an Ultra-Small Axial Flow Hydraulic Turbine

Yasuyuki Nishi | Yutaka Kobayashi | ... | Norio Kikuchi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 6048263
  • - Research Article

Effect of Impeller Inlet Geometry on Cavitation Performance of Centrifugal Pumps Based on Radial Basis Function

Shuwei Zhang | Renhui Zhang | ... | Junhu Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 4267429
  • - Research Article

Study on Hydraulic Performances of a 3-Bladed Inducer Based on Different Numerical and Experimental Methods

Yanxia Fu | Yujiang Fang | ... | Luca Dagostino
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 7458956
  • - Research Article

An Effective Gear Fault Diagnosis Method Based on Singular Value Decomposition and Frequency Slice Wavelet Transform

Fu-Cheng Zhou | Gui-Ji Tang | Yu-Ling He
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 7817134
  • - Research Article

An Investigation on the Dynamics of High-Speed Systems Using Nonlinear Analytical Floating Ring Bearing Models

Athanasios Chasalevris
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 8072078
  • - Research Article

Influence of Turbulence Model for Wind Turbine Simulation in Low Reynolds Number

Masami Suzuki
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 9281098
  • - Research Article

Rolling Bearing Degradation State Identification Based on LPP Optimized by GA

He Yu | Hong-ru Li | ... | Wei-guo Wang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 2573174
  • - Research Article

A Wave Energy Extraction System in Experimental Flume

Qin Guodong | Pang Quanru | Chen Zhongxian
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 3458750
  • - Research Article

Flettner Rotor Concept for Marine Applications: A Systematic Study

A. De Marco | S. Mancini | ... | F. De Luca
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 5327297
  • - Research Article

Extended Calibration Technique of a Four-Hole Probe for Three-Dimensional Flow Measurements

Suresh Munivenkatareddy | Nekkanti Sitaram
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 3878357
  • - Research Article

The Effect of Viscosity on Performance of a Low Specific Speed Centrifugal Pump

Rouhollah Torabi | Seyyed Ahmad Nourbakhsh
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 4618298
  • - Research Article

Characterization of a Twin-Entry Radial Turbine under Pulsatile Flow Condition

Mahfoudh Cerdoun | Adel Ghenaiet
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 4851454
  • - Research Article

Simulations of Steady Cavitating Flow in a Small Francis Turbine

Ahmed Laouari | Adel Ghenaiet
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2016
  • - Article ID 4293414
  • - Research Article

Comparison of Frequency Domain and Time-Domain Methods for Aeromechanical Analysis

M. T. Rahmati
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly and safely as possible. Any author submitting a COVID-19 paper should notify us at help@hindawi.com to ensure their research is fast-tracked and made available on a preprint server as soon as possible. We will be providing unlimited waivers of publication charges for accepted articles related to COVID-19. Sign up here as a reviewer to help fast-track new submissions.