International Journal of Rotating Machinery

Table of Contents: 1999

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 418253

The Dynamics of Rotor with Rubbing

Jerzy T. Sawicki | Joe Padovan | Rabih Al-Khatib
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 353456

Dynamic Analysis of Engine Bearings

H. Hirani | K. Athre | S. Biswas
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 123505

Rotating Flows Driven by Axisymmetric Blades in a Cylinder

Jae Won Kim
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 120817

Numerical and Experimental Investigations of Coupling Effects in Anisotropic Elastic Rotors

Horst Irretier | Georges Jacquet-Richardet | Frank Reuter
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 920328

On the Development of Viscous Solvers for Computation of Transient Flows in Turbomachines

Alexander Wiedermann | Kazuyoshi Miyagawa | Tsuyoshi Eguchi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 407834

Performance Evaluation of an Air-Conditioning Compressor Part II: Volute Flow Predictions

Yu-Tai Lee | Thomas W. Bein
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 917109

Performance Evaluation of an Air-Conditioning Compressor Part I: Measurement and Design Modeling

Thomas W. Bein | Yu-Tai Lee
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 414219

Mechanical Behavior of an Industrial Gas Turbine under Fault Conditions, a Case History

Stefan S. Florjancic | Noel Lively | Richard Thomas
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 814239

Transformation of Gear Inter-Teeth Forces into Acceleration and Velocity

Walter Bartelmus
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 619521

Revisiting Rotor Rigid Body Modes: Parametric Study of Stability

Nathan B. Littrell | Agnes Muszynska | Paul Goldman
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 462762

Experimental Investigations on Tilting Pad Journal Bearings

Renato Brancati | Stefano Pagano | ... | Riccardo Russo
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 570656

Bidirectional Brush Seals – Post-Test Analysis

Robert C. Hendricks | Jack Wilson | ... | Robert L. Mullen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 458947

Two-Phase Air/Oil Flow in Aero-Engine Bearing Chambers – Assessment of an Analytical Prediction Method for the Internal Wall Heat Transfer

A. Glahn | S. Wittig
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 596891

A New Approach to Assess the Quality of Small High-Speed Centrifugal Fans Using Noise Measurement

Dingjun Cui | Ian A. Craighead
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 862013

Effect of Rotor–Stator Interaction on Impeller Performance in Centrifugal Compressors

K. Sato | L. He
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.