International Journal of Rotating Machinery

Table of Contents: 2018

  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 9034934
  • - Editorial

Rotating Machinery in Renewable Energy Systems

M. El Haj Assad | Tareq Salameh | ... | Rafat Al-Waked
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 1840914
  • - Research Article

Static Mechanical Properties and Modal Analysis of a Kind of Lift-Drag Combined-Type Vertical Axis Wind Turbine

Fang Feng | Chunming Qu | ... | Yan Li
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 5238595
  • - Editorial

Multifault Detection, Diagnosis, and Prognosis for Rotating Machinery

Zhixiong Li | Grzegorz M. Królczyk
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2018
  • - Article ID 6398501
  • - Research Article

Innovations in Body Force Modeling of Transonic Compressor Blade Rows

David J. Hill | Jeffrey J. Defoe
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 5747034
  • - Editorial

Advances in Fluid Dynamics of Turbomachinery

Jingyin Li | Philipp Epple | ... | Lei Tan
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 9076472
  • - Review Article

Oscillatory Tip Leakage Flows and Stability Enhancement in Axial Compressors

Feng Lin | Jingyi Chen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2018
  • - Article ID 5051794
  • - Research Article

Influence of Spiral Angle on the Performance of Spiral Oil Wedge Sleeve Bearing

Li-li Wang | Qing-liang Zeng | Xin Zhang
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 2308759
  • - Research Article

Wall Pressure and Blade Surface Pressure in a Side Channel Blower

Sven Münsterjohann | Stefan Becker
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 7572631
  • - Research Article

Assessment of Steady and Unsteady Full Annulus Simulations Predictivity for a Low-Speed Axial Fan at Load-Controlled Windmill

Aurélie Ortolan | Suk-Kee Courty-Audren | ... | Florent Challas
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 8350243
  • - Research Article

Research on Aerodynamic Characteristics of Straight-Bladed Vertical Axis Wind Turbine with S Series Airfoils

Fang Feng | Shouyang Zhao | ... | Yan Li
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2018
  • - Article ID 9357249
  • - Research Article

Design and Analysis of CFD Experiments for the Development of Bulk-Flow Model for Staggered Labyrinth Seal

Filippo Cangioli | Paolo Pennacchi | ... | Lorenzo Ciuchicchi
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 9538489
  • - Research Article

Fault Tolerant Control of Internal Faults in Wind Turbine: Case Study of Gearbox Efficiency Decrease

Younes Ait El Maati | Lhoussain El Bahir | Khalid Faitah
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 6780137
  • - Research Article

Verification of Thermal Models of Internally Cooled Gas Turbine Blades

Igor Shevchenko | Nikolay Rogalev | ... | Nikolay Bychkov
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 7281691
  • - Research Article

Interpreting Aerodynamics of a Transonic Impeller from Static Pressure Measurements

Fangyuan Lou | John Charles Fabian | Nicole Leanne Key
  • International Journal of Rotating Machinery -
  • Special Issue
  • - Volume 2018
  • - Article ID 6069780
  • - Research Article

Optimized Blade Design of Counter-Rotating-Type Pump-Turbine Unit Operating in Pump and Turbine Modes

Jin-Woo Kim | Jun-Won Suh | ... | Jin-Hyuk Kim
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.