International Journal of Rotating Machinery

Table of Contents: 1997

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 426072

Performance and Exit Flow Characteristics of Mixed-Flow Turbines

C. Arcoumanis | R. F. Martinez-Botas | ... | C. C. Su
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 458315

Effects of Operating Conditions on the Flow in the Moving Blade Passage of a Single Stage Axial-Flow Fan

Tsutomu Adachi | Yutaka Yamashita | ... | Tatsuo Kawai
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 172630

Measurements of the Flow in Backshroud/Casing Clearance of Precessing Centrifugal Impeller

Yoshiki Yoshida | Yoshinobu Tsujimoto | ... | Shin Ishizaki
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 851802

Hysteresis in Oil Flow through a Rotating Tube with Twin Exit Branches

Sun-Wen Cheng | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 796173

Investigation of the Flow in Pelton Turbines and the Influence of the Casing

Heinz-Bernd Matthias | Josef Prost | Christian Rossegger
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 319470

Air-Turbine with Self-Pitch-Controlled Blades for Wave Energy Conversion (Estimation of Performances in Periodically Oscillating Flow)

T. Setoguchi | S. Raghunathan | ... | K. Kaneko
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 716589

Visualization of Flows in Curved Channels with a Moderate or High Rotation Speed

Liqiu Wang | K. C. Cheng
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 656052

Instability Threshold of a Rigid Rotor-Tilting Pad Journal Bearings System

Stefano Pagano | Ernesto Rocca | ... | Riccardo Russo
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 834601

Developments in Dynamics of Composite Material Shafts

S. P. Singh | H. B. H. Gubran | K. Gupta
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 290273

Advanced Compressor Loss Correlations, Part II: Experimental Verifications

M. T. Schobeiri
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 359032

Advanced Compressor Loss Correlations, Part I: Theoretical Aspects

M. T. Schobeiri
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 909462

3-D Viscous Flow Analysis of an Axial Flow Pump Impeller

Steven M. Miner
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 645682

Quantification of Gear Tooth Damage by Optimal Tracking of Vibration Signatures

F. K. Choy | R. J. Veillette | ... | R. C. Hendricks
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 146971

Dynamics of Anisotropically Supported Rotors

Agnes Muszynska | Charles T. Hatch | Donald E. Bently
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 375023

Measurements of the Influence of Integral Length Scale on Stagnation Region Heat Transfer

G. James Van Fossen | Chan Y. Ching
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.700
Journal Citation Indicator0.290
Impact Factor-
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.