International Journal of Rotating Machinery

Table of Contents: 2004

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 595204

General Influence Coefficient Algorithm in Balancing of Rotating Machinery

Xiaoping Yu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 910123

Inverse Design of Centrifugal Compressor Stages Using a Meanline Approach

Yuri Biba | Peter Menegay
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 747943

Improvement of the Turbine Main Stop Valves with Flow Simulation in Erosion by Solid Particle Impact CFD

Z. Mazur | G. Urquiza | R. Campos
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 919257

Measurements of Strain on 310 mm Torque Converter Turbine Blades

P. O. Sweger | C. L. Anderson | J. R. Blough
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 870275

A Nonlinear Model for Prediction of Dynamic Coefficients in a Hydrodynamic Journal Bearing

Jerzy T. Sawicki | T. V. V. L. N. Rao
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 238903

Multi-Control-Volume Analysis of the Compression Process in a High-Temperature Root's Type Compressor

David I. Blekhman | Joseph C. Mollendorf | ... | John A. Lordi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 906130

Unsteady Interaction Between a Transonic Turbine Stage and Downstream Components

Roger L. Davis | Jixian Yao | ... | Michael G. Dunn
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 247573

Transient Vibration Prediction for Rotors on Ball Bearings Using Load-Dependent Nonlinear Bearing Stiffness

David P. Fleming | J. V. Poplawski
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 184869

Part II—Case Studies for a Synchronous Thermal Instability Operating in Overhung Rotors

A. C. Balbahadur | R. G. Kirk
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 937182

Part I—Theoretical Model for a Synchronous Thermal Instability Operating in Overhung Rotors

A. C. Balbahadur | R. G. Kirk
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 762502

Effect of Turn Region Treatments on the Pressure Loss Distribution in a Smooth Square Channel with Sharp 180° Bend

D. V. Ratna Rao | Chakka Sarat Babu | S. V. Prabhu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 517231

Recent Studies in Turbine Blade Cooling

Je-Chin Han
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 576764

Rotating Stall in Centrifugal Compressor Vaneless Diffuser: Experimental Analysis of Geometrical Parameters Influence on Phenomenon Evolution

Giovanni Ferrara | Lorenzo Ferrari | Leonardo Baldassarre
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 912427

On Using the Transfer Matrix Formulation for Transient Analysis of Nonlinear Rotor Bearing Systems

A. Liew | N. S. Feng | E. J. Hahn
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 592040

Study on the Performance of a Sirocco Fan (Flow Around the Runner Blade)

Tsutomu Adachi | Naohiro Sugita | Yousuke Yamada
International Journal of Rotating Machinery
 Journal metrics
See full report
Acceptance rate13%
Submission to final decision86 days
Acceptance to publication16 days
CiteScore2.300
Journal Citation Indicator0.290
Impact Factor0.9
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.