International Journal of Rotating Machinery

Table of Contents: 1995

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 350591

Modelling Turbine Vibration in Terms if its Load Variation

T. J. Chalko | D. X. Li
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 403216

Rotordynamic Coefficients of Long Staggered Labyrinth Gas Seals

K. Kwanka | W. Ortinger
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 126796

Analysis of Vibration Characteristics for a Rotor-Bearing System Using Distributed Spring and Damper Model

D. C. Han | S. H. Choi | Y. H. Lee
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 401837

Identification Procedures as Tools for Fault Diagnosis of Rotating Machinery

Susanne Seibold | Claus-Peter Fritzen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 102137

Vibrational Diagnostics of Rotating Machinery Malfunctions

Agnes Muszynska
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 745046

Effects of Hydrostatic Pocket Shape on the Flow Pattern and Pressure Distribution

M. J. Braun | M. Dzodzo
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 508419

Convex Curvature Effect on the Wake Including Recovery from the Curvature

S. M. You
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 760141

Laser Velocimetry Measurements in a Double Volute Centrifugal Pump

William De Ojeda | Ronald D. Flack | Steven M. Miner
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 528936

A Numerical Study on Turbulent Couette Flow and Heat Transfer in Concentric Annuli by Means of Reynolds Stress Turbulence Model

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 407506

The Effect of Surface Roughness of a Body in the High Reynolds Number Flow

Tsutomu Adachi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 987852

A Numerical Analysis on Flow and Heat Transfer in the Entrance Region of an Axially Rotating Pipe

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 586386

Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream

R. C. Hendricks | B. M. Steinetz | ... | G. L. Von Pragenau
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 137503

Ekman Boundary Layers and Energy Dissipation in Rotating Drums During Spin-Down Process

Hiroshi Ohue | Genshi Kawashima | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 896175

Secondary Flow Phenomena in Rotating Radial Straight Pipes

K. C. Cheng | Liqiu Wang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 209310

Evaluation of Seal Effects on the Stability of Rotating Fluid Machinery

T. Iwatsubo | B. C. Sheng
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit