International Journal of Rotating Machinery

Table of Contents: 1996

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 965818

Influence of Bearing Defects on Dynamical Behavior of An Elastic Shaft

Olivier Bonneau | Jean Frêne
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 653674

Effect of Upstream Wake on Shower-Head Film Cooling

Ping-Hei Chen | Jr-Ming Miao
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 979854

Film Cooling from a Single Row of Compound Angle Holes at High Blowing Ratios

Phillip M. Ligrani | Joon Sik Lee
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 578343

Experimental Investigation of the Flow Field in a Multistage Axial Flow Compressor

B. Lakshminarayana | N. Suryavamshi | ... | R. Moritz
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 762420

System Identification Methods for Dynamic Testing of Fluid-Film Bearings

Jerzy T. Sawicki | Maurice L. Adams | Russell J. Capaldi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 236392

Mass Transfer over a Film-Cooled Turbine Blade

Ping-Hei Chen | Jr-Ming Miao
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 504916

Erratum

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 756352

Turbulence and Scale Measurements in a Square Channel with Transverse Square Ribs

Richard B. Rivir | Mingking K. Chyu | Paul K. Maciejewski
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 632605

Film Cooling from Two Staggered Rows of Compound Angle Holes at High Blowing Ratios

Phillip M. Ligrani | Joon Sik Lee
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 323809

Identification of the Quadrature Resonances Using Modal Nonsynchronous Perturbation Testing and Dynamic Stiffness Approach for an Anisotropic Rotor System with Fluid Interaction

Eungu Jang | Agnes Muszynska | ... | Chang-Ho Kim
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 514516

Dynamic Analysis of Composite Rotors

S. P. Singh | K. Gupta
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 386130

A Small Perturbation CFD Method for Calculation of Seal Rotordynamic Coefficients

M. M. Athavale | R. C. Hendricks
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 125215

Prandtl Number Effects on Mixed Convection Between Rotating Coaxial Disks

Chyi-Yeou Soong
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 307605

Impeller Flow Field Laser Velocimeter Measurements

L. A. Brozowski | T. V. Ferguson | L. Rojas
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 324746

An Integrated Flow Analysis System for the Recalculation of Hydraulic Machinery Bladings

H. Haas | N. Riedel | ... | R. Schilling
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.