International Journal of Rotating Machinery

Table of Contents: 1998

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 267487

Heat Transfer and Friction in a Low-Aspect-Ratio Rectangular Channel with Staggered Slit-Ribbed Walls

Jenn-Jiang Hwang | Tong-Miin Liou
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 989832

Thermal-Fluid Transport Phenomena of a Strongly-Heated Gas Flow in Parallel Tube Rotation

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 540124

Calculation of Rotor Dynamic Coefficients for Labyrinth Seals

B. P. Williams | R. D. Flack
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 457916

Analytic Creep Durability of Rotating Uniform Disks

Yuriy Nyashin | Victor Shishlyaev
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 746546

Modeling of Compressor Performance Deterioration Due to Erosion

A. Hamed | W. Tabakoff | D. Singh
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 621028

Blade Deterioration in a Gas Turbine Engine

W. Tabakoff | A. Hamed | V. Shanov
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 787468

Experimental Investigation of Rotor-Stator Interaction in Axial-Flow Turbines and Compressors

Heinz E. Gallus
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 438637

Heat Transfer on a Film-Cooled Rotating Blade Using a Two-Equation Turbulence Model

Vijay K. Garg
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 209417

Small Radial Compressors: Aerodynamic Design and Analysis

K. A. R. Ismail | C. V. A. G. Rosolen | ... | D. Lucato
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 616218

Heat/Mass Transfer Distribution in a Rotating Two-Pass Square Channel Part I: Regional Heat Transfer, Smooth Channel

C. W. Park | M. Kandis | S. C. Lau
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 386216

Effect of Film Injection Location on Local Heat Transfer Coefficient on a Gas Turbine Blade

Anant B. Mehendale | H. Wanda Jiang | ... | Je-Chin Han
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 174851

Numerical Study for Optimizing Heat Transfer in High Speed Rotating Components

S. Wittig | S. Kim | ... | I. Weissert
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 428734

Wind Turbine Aerodynamic Performance by Lifting Line Method

Horia Dumitrescu | Vladimir Cardos
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 950151

Appropriate Dynamic-Stall Models for Performance Predictions of VAWTs with NLF Blades

Christian Masson | Christophe Leclerc | Ion Paraschivoiu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 652692

Flow and Mass Transfer Performance in Short Pin-Fin Channels with Different Fin Shapes

R. J. Goldstein | S. B. Chen
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.700
Journal Citation Indicator0.290
Impact Factor-
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.