International Journal of Rotating Machinery

Table of Contents: 2001

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 753527

Thermal Buoyancy Effects in Rotating Non-Isothermal Flows

C. Y. Soong
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 762718

Effects of Gaps Between Side-Walls and 60 Ribs on the Heat Transfer and Rib Induced Secondary Flow Inside a Stationary and Rotating Cooling Channel

Robert Kiml | Sadanari Mochizuki | Akira Murata
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 624708

Detailed Film Cooling Measurements over a Gas Turbine Blade Using a Transient Liquid Crystal Image Technique

Hui Du | Srinath V. Ekkad | ... | C. Pang Lee
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 512930

Study on the Performance of a Sirocco Fan (Optimum Design of Blade Shape)

Tsutomu Adachi | Naohiro Sugita | Yousuke Yamada
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 613563

Effects of Leading Edge Sweep on the Cavitating Characteristics of Inducer Pumps

Allan J. Acosta | Yoshinobu Tsujimoto | ... | Paul Cooper
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 549859

A Parametric Study of Solute Redistribution During Transient Liquid Phase Diffusion Bonding Process

Tien-Chien Jen | Yuning Jiao | Thomas Hwang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 630947

Experimental and Computational Study of Trapped Vortex Combustor Sector Rig with High-Speed Diffuser Flow

R. C. Hendricks | D. T. Shouse | ... | J. A. Hendricks
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 746857

Celebration of Professor Wen-Jei Yang's 70th Birthday

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 467219

Recontouring of Jet Engine Compressor Blades by Flow Simulation

Herwart Hönen | Matthias Panten
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 536016

Fluid Flow and Heat Transfer in an Internal Coolant Passage

Tom I.-P. Shih | Yu-Liang Lin | Mark A. Stephens
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 483142

Influence of Inter-row Gap Value on Turbine Losses

Paul G. A. Cizmas | Corbett R. Hoenninger | ... | Harry F. Martin
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 270835

Stabilization of Centrifuges with Instabilities Due to Fluid-Structure Interactions: Various Control Approaches

Heinz Ulbrich | Adrian Cyllik | Guido Ahaus
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 610328

Model Based Fault Identification in Rotor Systems by Least Squares Fitting

Richard Markert | Roland Platz | Malte Seidler
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 791872

Stability Analysis of Symmetrical Rotors Partially Filled with a Viscous Incompressible Fluid

Zhu Changsheng
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 7
  • - Article ID 859189

Flow Structures Inside a Rotor-Stator Cavity

T. Geis | J. Ebner | ... | S. Wittig
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.700
Journal Citation Indicator0.290
Impact Factor-
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.