International Journal of Rotating Machinery

/ Table of Contents

Table of Contents

Table of Contents

International Journal of Rotating Machinery -
Special Issue
Volume 5
- Article ID 862013

Effect of Rotor–Stator Interaction on Impeller Performance in Centrifugal Compressors

K. Sato | L. He

International Journal of Rotating Machinery -
Special Issue
Volume 7
- Article ID 731341

Stability Analysis of a Gear Pair System Supported by Squeeze-Film Dampers

T. N. Shiau | J. R. Chang | S. T. Choi

International Journal of Rotating Machinery -
Special Issue
Volume 8
- Article ID 268959

Turbulent Flow and Endwall Heat Transfer Analysis in a 908 Turning Duct and Comparisons with Measured Data: Part II: Influence of Secondary Flow, Vorticity, Turbulent Kinetic Energy, and Thermal Boundary Conditions on Endwall Heat Transfer

Kuisoon Kim | Brian G. Wiedner | Cengiz Camci

International Journal of Rotating Machinery -
Special Issue
Volume 9
- Article ID 273215

An Experimental Study on the Fluid Forces Induced by Rotor-Stator Interaction in a Centrifugal Pump

Shijie Guo | Hidenobu Okamoto

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 105043

Optimization of Meridional Flow Channel Design of Pump Impeller

Sunao Miyauchi | Hironori Horiguchi | ... | Akihiro Takahashi

International Journal of Rotating Machinery -
Special Issue
Volume 6
- Article ID 450803

A Comparison of Performances of Turbines for Wave Power Conversion

T. Setoguchi | M. Takao | K. Kaneko

International Journal of Rotating Machinery -
Special Issue
Volume 3
- Article ID 375023

Measurements of the Influence of Integral Length Scale on Stagnation Region Heat Transfer

G. James Van Fossen | Chan Y. Ching

International Journal of Rotating Machinery -
Special Issue
Volume 2005
- Article ID 564179

A Multicoefficient Slip-Corrected Reynolds Equation for Micro-Thin Film Gas Lubrication

Eddie Yin-Kwee Ng | Ningyu Liu

International Journal of Rotating Machinery -
Special Issue
Volume 1
- Article ID 586386

Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream

R. C. Hendricks | B. M. Steinetz | ... | G. L. Von Pragenau

International Journal of Rotating Machinery -
Special Issue
Volume 2
- Article ID 137503

Ekman Boundary Layers and Energy Dissipation in Rotating Drums During Spin-Down Process

Hiroshi Ohue | Genshi Kawashima | Wen-Jei Yang

International Journal of Rotating Machinery -
Special Issue
Volume 4
- Article ID 428734

Wind Turbine Aerodynamic Performance by Lifting Line Method

Horia Dumitrescu | Vladimir Cardos

International Journal of Rotating Machinery -
Special Issue
Volume 2005
- Article ID 498954

Comparative Study of Unsteady Flows in a Transonic Centrifugal Compressor with Vaneless and Vaned Diffusers

International Journal of Rotating Machinery -
Special Issue
Volume 4
- Article ID 950151

Appropriate Dynamic-Stall Models for Performance Predictions of VAWTs with NLF Blades

Christian Masson | Christophe Leclerc | Ion Paraschivoiu

International Journal of Rotating Machinery -
Special Issue
Volume 8
- Article ID 647608

Turbulent Flow and Endwall Heat Transfer Analysis in a Turning Duct and Comparisons with Measured Data: Part I: Influence of Reynolds Number and Streamline Curvature on Viscous Flow Development

Kuisoon Kim | Brian G. Wiedner | Cengiz Camci

International Journal of Rotating Machinery -
Special Issue
Volume 6
- Article ID 570959

Coupled Vibration of Unshrouded Centrifugal Compressor Impellers. Part II: Computation of Vibration Behavior

Dirk Hagelstein | Heinrich Hasemann | Manfred Rautenberg

45|46|47|48|49|50|51|52

Evaluate your manuscript with the free Manuscript Language Checker

Author guidelines

Editorial board

Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.