International Journal of Rotating Machinery

Table of Contents: 2003

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 549149

Weibull-Based Design Methodology for Rotating Structures in Aircraft Engines

Erwin V. Zaretsky | Robert C. Hendricks | Sherry Soditus
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 293683

Deflections and Strains in Cracked Shafts Due to Rotating Loads: A Numerical and Experimental Analysis

Nicolò Bachschmid | Ezio Tanzi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 317159

Phase-Averaged Method Applied to Periodic Flow Between Shrouded Corotating Disks

Shen-Chun Wu | Yau-Ming Chen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 907631

Pressure Fluctuation in a Vaned Diffuser Downstream from a Centrifugal Pump Impeller

Akinori Furukawa | Hisasada Takahara | ... | Yusuke Ono
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 546204

Comparison of Two Diffusers in a Transonic Centrifugal Compressor

Koji Nakagawa | Hiroshi Hayami | Yuichi Keimi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 671948

Modeling of Unsteady Sheet Cavitation on Marine Propeller Blades

Spyros A. Kinnas | HanSeong Lee | Yin L. Young
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 424012

Rotor Dynamics Analysis of Rotating Machine Systems Using Artificial Neural Networks

M. Kalkat | Ş. Yıldırım | I. Uzmay
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 521904

Numerical Calculation of the Three-Dimensional Swirling Flow Inside the Centrifugal Pump Volutes

E. Cezmi Nursen | Erkan Ayder
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 729861

Reduction of Discrete-Frequency Fan Noise Using Slitlike Expansion Chambers

Akira Sadamoto | Yoshinori Murakami
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 941201

Panel Discussion on Inducer Design Criteria

Marc Wegner | Allan J. Acosta | Yoshinobu Tsujimoto
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 654670

Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers

Lars Panning | Walter Sextro | Karl Popp
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 401215

Vibration and Stability of 3000-hp, Titanium Chemical Process Blower

Les Gutzwiller | Mark A. Corbo
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 282780

Using the Modal Method in Rotor Dynamic Systems

Eduard Malenovský
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 596590

Two- and Three-Dimensional Numerical Experiments Representing Two Limiting Cases of an In-Line Pair of Finger Seal Components

M. J. Braun | V. V. Kudriavtsev | ... | M. P. Proctor
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 897975

Cavitating Flow Calculations in Industry

Philippe Dupont | Tomoyoshi Okamura
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.700
Journal Citation Indicator0.290
Impact Factor-
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.