International Journal of Rotating Machinery

/ Table of Contents: 2004

Table of Contents

Table of Contents: 2004

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 952429

Experimental Investigation of the Periodic Unsteady Transonic Flow Field Around a Compressor Blade by Means of Particle Image Velocimetry (PIV)

A. Lehr | A. Bölcs

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 378615

Aerodynamic and Performance Behavior of a Three-Stage High Efficiency Turbine at Design and Off-Design Operating Points

M. T. Schobeiri | J. L. Gilarranz | E. S. Johansen

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 642753

The Pre-Stall Behavior of a 4-Stage Transonic Compressor and Stall Monitoring Based on Artificial Neural Networks

Frank-Oliver Methling | Horst Stoff | Frank Grauer

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 214914

Development of a Three-Dimensional Geometry Optimization Method for Turbomachinery Applications

Steffen Kämmerer | Jürgen F. Mayer | ... | Alexander R. Jung

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 262319

Shape Optimization of a Labyrinth Seal Applying the Simulated Annealing Method

V. Schramm | J. Denecke | ... | S. Wittig

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 580610

An Experimental Investigation on Transpiration Cooling Part II: Comparison of Cooling Methods and Media

J. H. Wang | J. Messner | H. Stetter

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 158107

Adiabatic Effectiveness and Heat Transfer Coefficient of Shaped Film Cooling Holes on a Scaled Guide Vane Pressure Side Model

Jan Dittmar | Achmed Schulz | Sigmar Wittig

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 625825

Development of the Floating Centrifugal Pump by Use of Non Contact Magnetic Drive and Its Performance

Mitsuo Uno | Takaaki Masuzoe | ... | Toshiaki Kanemoto

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 419761

Nonlinear Normal Modes of a Rotating Shaft Based on the Invariant Manifold Method

Mathias Legrand | Dongying Jiang | ... | Steven W. Shaw

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 425834

The Flow Rate Influence on the Interaction of a Radial Pump Impeller and the Diffuser

A. Akhras | M. El Hajem | ... | R. Morel

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 257687

Design Optimization of Tilting-Pad Journal Bearing Using a Genetic Algorithm

Hamit Saruhan | Keith E. Rouch | Carlo A. Roso

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 416164

Identification of a Generator Fault by Model-Based Diagnostic Techniques

P. Pennacchi | A. Vania

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 958104

Predictive Failure of Cylindrical Coatings Using Weibull Analysis

Brian L. Vlcek | Robert C. Hendricks | Erwin V. Zaretsky

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 267838

Deflections and Strains in Cracked Shafts due to Rotating Loads: A Numerical and Experimental Analysis

N. Bachschmid | E. Tanzi

International Journal of Rotating Machinery -
Special Issue
Volume 10
- Article ID 638643

Identification of Rub and Unbalance in 320-MW Turbogenerators

N. Bachschmid | P. Pennacchi | ... | L. Gregori

Evaluate your manuscript with the free Manuscript Language Checker

Author guidelines

Editorial board

Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.